Fits select 1990-2019 Subaru (Impreza, WRX, STI, Forester, Legacy, Outback, BRZ), 2005-2006 Saab 9-2X, and 2013 Scion FR-S.

Replace restrictive OE components and unlock alignment precision with the Whiteline KCA335 Offset Front Upper Strut Mounts. Designed for enthusiasts and track-day drivers, these mounts allow for targeted adjustments of either caster or camber depending on your vehicle's requirements and the mounting orientation. By optimizing the alignment, you maximize the tire contact patch during cornering, significantly improving turn-in response and directional stability.

Constructed with low-compliance rubber, these mounts reduce the deflection found in factory rubber bushings while maintaining better NVH (noise, vibration, harshness) characteristics than solid spherical bearings. The assembly features a twin shielded bearing design to ensure smooth steering operation under high loads, while the metal components are treated with a protective plating to resist corrosion in the harshest environments.

• Manufacturer Part Number: KCA335
• Adjustment: Offset design allows for caster or camber correction
• Construction: High-durability, low-compliance rubber
• Bearings: Twin shielded bearing design for smooth rotation
• Finish: Protective plating for superior corrosion resistance
• Included: Complete offset mount assembly and installation guide

Fits 1994-1999 Dodge Ram 1500, 2500, and 3500 4x4 trucks.

The Synergy Manufacturing Heavy Duty Drag Link (8567-13) is engineered to replace the undersized factory steering linkage on second-generation Dodge Ram trucks. This heavy-duty upgrade provides significantly increased strength and stiffness compared to original equipment, helping to eliminate steering play and front-end wandering—especially on vehicles equipped with larger-than-stock tires.

• Direct bolt-on replacement for the factory drag link to restore steering precision.
• Heavy-duty construction designed to withstand the increased stresses of off-road use and oversized wheel setups.
• Compatible with 4x4 drivetrains on 1500, 2500, and 3500 chassis.
• Helps maintain correct steering geometry and improves overall front-end durability.
• Manufacturer Part Number: 8567-13.

Fits 2007-2018 Jeep Wrangler JK and JKU (2-door and 4-door).

The Synergy Rear Lower Shock Mount Kit provides a heavy-duty solution for replacing or upgrading the factory shock mounting points on your rear axle. Designed specifically for the Jeep Wrangler JK platform, this kit (MPN 8074) addresses the common need for more robust shock attachment points, ensuring your rear suspension remains secure during high-articulation off-road use. These mounts are engineered to withstand the rigors of the trail, providing a reliable alternative to damaged or weak factory brackets.

• Replaces or reinforces rear axle lower shock mounts
• Engineered for 2007-2018 Jeep Wrangler JK and JKU models
• Heavy-duty construction for improved durability in off-road environments
• Designed to maintain proper shock geometry
• Manufacturer Part Number: 8074

Fits 2007-2018 Jeep Wrangler JK and JKU models equipped with 2.5-inch OD axle tubes.

These Synergy Manufacturing Heavy-Duty (HD) Front Axle Lower Shock Mounts provide a robust replacement for the thin, vulnerable factory brackets that are prone to bending or tearing during off-road use. Designed specifically for axle housings with a 2.5-inch outer diameter (OD) tube, these mounts are engineered to withstand the increased stresses of aftermarket suspension systems and rough terrain.

• Manufactured from heavy-duty steel for maximum durability and impact resistance
• Designed to fit 2.5-inch OD axle tubes
• Replaces weak OE lower shock mounts that often fail under load
• Engineered for precise shock geometry on the JK/JKU front axle
• Manufacturer Part Number: 8012-10

Fits 2012-2020 Subaru BRZ (Right Front).

The Ohlins Front Upper Strut Mount (MPN 25633-44) is a precision-engineered replacement for the factory right-side mount, designed to maintain accurate suspension geometry and provide a rigid mounting point for the strut assembly. By reducing deflection compared to worn OE bushings, this mount ensures that the dampers can work effectively, restoring steering response and chassis stability.

• Direct replacement for the right-hand front upper strut mount
• Designed to meet the tolerances required for performance suspension systems
• Constructed from high-grade materials to withstand increased load and stress
• Essential for maintaining consistent alignment settings during spirited driving
• Manufacturer Part Number: 25633-44

Fits select 1998-2010 Volkswagen Beetle, Golf, GTI, Jetta, R32, and 2000-2006 Audi TT (1.8T).

Achieve precise alignment control on your Audi or Volkswagen with the SPC Performance adjustable front strut mount. This kit allows for both camber and caster adjustments, which are essential for maintaining handling performance and even tire wear on lowered vehicles or those used in performance driving. By replacing the factory upper bearing plate with this adjustable assembly, you gain the ability to dial in suspension geometry that the OE hardware cannot accommodate.

Installation requires removing the front strut assembly and using a spring compressor to safely swap the original equipment plate for the SPC adjustable unit. This kit is designed to bolt directly into the factory location once the strut is reassembled.

• Manufacturer Part Number: 81340
• Adjustment Range: Camber and Caster
• Position: Front
• Replaces OE upper bearing plate
• Includes all necessary hardware for one strut mount assembly

Fits select 1967-1991 Chevrolet Blazer, K10, K20, K30, V10, V20, V30, V1500, V2500, and GMC Jimmy, K1500, K2500, and K3500 models.

Skyjacker Multi-Shock Bracket Kits are engineered to provide a robust mounting solution for dual or multiple shock absorber configurations. By allowing for additional damping capacity, these brackets help stabilize your vehicle’s suspension, reducing shock fade and improving handling characteristics whether you are navigating technical trails or driving on the street. Each bracket is designed for a precise fit to the vehicle's specific geometry, ensuring a reliable installation that stands up to the rigors of off-road use.

• Enables the installation of multiple shock absorbers for increased damping control
• Durable construction designed to withstand heavy-duty off-road environments
• Improves ride stability and reduces suspension vibration
• Compatible with factory and aftermarket suspension setups
• Manufacturer Part Number: DS250
• Limited Lifetime Warranty

Fits 2017+ Honda Civic Type R (FK8 and FL5).

RS-R Front Pillowball Upper Mounts are engineered to replace the compliant factory rubber mounts, providing a more rigid and precise connection between the suspension and the chassis. By utilizing high-quality spherical bearings instead of rubber bushings, these mounts eliminate unwanted deflection during high-load cornering and heavy braking. This results in significantly sharper steering response, more direct feedback, and improved handling consistency for both street and track applications.

• High-strength pillowball bearings for maximum rigidity
• Eliminates suspension deflection for improved steering feel
• Engineered for high-performance driving environments
• Direct replacement for factory upper mounts
• Manufacturer Part Number: XNSPH064PUF

Fits select 2015-2025 Ford F-150 models including XL, XLT, Lariat, Raptor, and Tremor.

The Ridetech Traction Bar Kit is engineered to eliminate axle wrap and improve power delivery for lowered 2015-2025 Ford F-150 trucks. Designed specifically for use with Ridetech lowering kits, this system prevents rear axle rotation during acceleration, providing consistent traction and preventing wheel hop without compromising ride quality.

The kit features a pair of double adjustable bars equipped with high-strength heim ends for precise suspension geometry tuning. All brackets and hardware are finished in a durable satin black powder coat to ensure long-lasting corrosion resistance and a professional look under the chassis.

• Eliminates rear axle wrap for improved traction and stability.
• Double adjustable bars allow for fine-tuned suspension geometry.
• Heavy-duty heim ends provide durable, precise articulation.
• Includes pivot brackets, axle brackets, bump stops, and all necessary mounting hardware.
• Finished in a protective satin black powder coat.
• Engineered specifically for compatibility with Ridetech lowering systems.
• Manufacturer Part Number: 12297250

Fits select 2007-2019 Chevrolet Silverado 1500 and GMC Sierra 1500 models, including 2019 Silverado LD and Sierra Limited editions.

The Ridetech Bolt-On 4-Link system is engineered to replace the factory leaf spring suspension, providing significantly improved axle control and handling for your GM truck. This system eliminates leaf spring wrap and wheel hop while allowing for a lower ride height and improved suspension geometry. By utilizing a parallel 4-link design with a panhard bar, the rear axle remains centered throughout the suspension travel, offering a more predictable and stable driving experience.

This system features Ridetech’s proprietary R-Joint rod ends, which combine low-friction movement with high-articulation capability to ensure bind-free performance without the noise and maintenance of traditional rod ends. The entire kit is finished in a durable black powder coat for long-term corrosion resistance and includes heavy-duty C-notches to provide the necessary axle clearance for lowered ride heights.

• Manufacturer Part Number: 11707199
• Installation: 100% Bolt-on design requires no welding
• Bushings: Low-friction, high-articulation R-Joints
• Finish: Black powder-coated components
• Frame Modification: Includes C-notches for increased axle travel
• Compatibility: Designed for use with Shockwaves or Coil-Overs (sold separately)
• Included: 4-link bars, panhard bar, mounting brackets, C-notches, and R-Joints

Fits 1970-1981 Chevrolet Camaro and Pontiac Firebird models.

The Ridetech Bolt-On 4-Link rear suspension system is designed to modernize the chassis of 1970-1981 GM F-Body vehicles by replacing the factory leaf springs with a highly tunable 4-link setup. This system drastically improves rear axle control, traction, and ride quality. It includes double adjustable link bars that allow for precise setting of the pinion angle and centering of the axle. Equipped with patented R-Joint technology, this kit provides low-friction, high-articulation movement without the noise or harshness of traditional rod ends.

• Double adjustable bars allow for fine-tuning of suspension geometry and pinion angle
• Patented R-Joint rod ends ensure quiet operation and bind-free articulation
• Heavy-duty bolt-on cradle and axle brackets for a secure installation
• Durable black powder-coated finish protects components from the elements
• Compatible with Ridetech Shockwaves or Coil-Overs (sold separately)
• Manufacturer Part Number: 11177187

Includes: Bolt-on cradle, four link bars, R-Joints, axle brackets, and all necessary mounting hardware.

The Progressive Jeep JL and Gladiator Mojave Collar Kit (MPN 5011-800) is a precision-engineered solution designed to level the stance of your vehicle while preserving the premium performance of the factory Fox shocks. Specifically tuned for the Mojave trim's unique suspension geometry, this kit provides a front-end lift to correct the factory rake and provide additional clearance for larger wheel and tire packages.

• Specifically designed for Jeep Wrangler JL and Gladiator JT Mojave models
• Adds front-end lift by increasing preload on factory 2.5-inch internal bypass shocks
• Maintains original damping characteristics and factory ride quality
• CNC-machined for precise tolerances and long-term durability
• Bolt-on installation with all necessary hardware included
• Manufacturer Part Number: 5011-800

By utilizing these collars, owners can achieve a more aggressive profile and improved approach angles without the need for a full coil spring replacement, making it an ideal upgrade for those looking to enhance their Mojave's off-road capabilities.

Fits 2008-2009 Pontiac G8 (Base, GT, GXP) and 2011-2013 Chevrolet Caprice PPV.

The Pedders PED-5851 Front Strut Mount is engineered as a heavy-duty, direct OE replacement designed to restore steering precision and suspension geometry. Over time, factory rubber mounts often compress or tear, leading to alignment drift, increased NVH (noise, vibration, harshness), and diminished handling. Pedders identifies these original equipment weaknesses and develops components that provide a durable, long-term solution for enthusiast drivers.

Constructed with high-quality materials to withstand the loads of performance driving while maintaining daily-driver civility, this mount ensures the strut assembly remains securely positioned within the tower. It is an essential component when refreshing a high-mileage suspension or installing new struts to ensure optimal performance and quiet operation.

• Direct OE replacement for a precise, bolt-on fitment
• Heavy-duty construction to resist compression and wear
• Corrects suspension geometry issues caused by collapsed factory mounts
• Maintains the ideal balance between performance handling and ride comfort
• Manufacturer Part Number: PED-5851

Fits select 2008-2017 Subaru Forester and Impreza models, including WRX and WRX STI.

The Pedders Front Strut Mount is engineered as a heavy-duty replacement for worn or damaged factory mounts, designed to restore the precise handling and ride comfort of your Subaru. As the critical connection point between the strut assembly and the vehicle chassis, a compromised mount can lead to increased noise, vibration, and harshness (NVH) or unpredictable steering response. Pedders components are developed to address these OE weaknesses, providing a factory-like feel with enhanced durability for enthusiast drivers.

• Heavy-duty construction for improved service life over standard replacements
• Direct OE fitment ensures a straightforward installation into factory mounting points
• Restores steering precision and eliminates suspension clunking caused by worn bushings
• Engineered to maintain the ideal balance between civility and performance handling
• Manufacturer Part Number: PED-585013
• Sold individually

Fits select 2005-2014 Ford Mustang models, including Base, GT, Bullitt, and Shelby GT500.

The Pedders PED-580097 is a Heavy Duty GT500-style front strut mount engineered to replace worn factory components and restore suspension precision. As S197 chassis bushings age, the factory upper mounts often suffer from rubber compression and bearing failure, leading to unwanted suspension noise and degraded handling response. This mount is designed as a direct replacement for the original equipment, offering a more robust alternative for enthusiast drivers who demand a balance between daily-driver civility and performance handling.

Built to resist the premature wear associated with spirited driving, this mount ensures the front suspension remains quiet and comfortable while maintaining proper alignment geometry. It is an ideal upgrade for standard GT and Base models looking for the increased durability found in the Shelby GT500 design.

• Heavy Duty GT500-style construction for increased durability and longevity
• Replaces worn factory mounts to eliminate front-end clunking and noise
• Restores steering precision and handling feel
• Direct-fit installation to factory mounting points
• Manufacturer Part Number: PED-580097

Fits select 1990-2025 Subaru, Toyota, Scion, and Saab models including Legacy, Impreza (WRX/STI), Forester, BRZ, 86, and GR86.

The Pedders Increased Caster Offset Front Strut Mount is engineered for enthusiasts looking to optimize front-end geometry. This heavy-duty rubber mount provides a high-performance alternative to factory components, allowing for precise alignment tuning that improves steering response and turn-in. By utilizing an offset design, this mount helps restore or enhance suspension geometry on lowered vehicles or those used in spirited driving conditions.

Constructed from high-density (HD) rubber, these mounts maintain the civility of an OEM bushing while offering the durability required for performance applications. Unlike rigid camber plates that can introduce excessive noise, vibration, and harshness (NVH), these mounts provide the ideal balance between performance handling and daily-driver comfort.

• Adjustment Range: +/- 0.75 degrees of caster and camber
• Construction: High-density (HD) rubber for superior NVH control and longevity
• Design: Offset mounting points for enhanced alignment specifications
• Fitment: Engineered to bolt directly to factory mounting locations
• Quantity: Sold as a single mount
• Manufacturer Part Number: PED-580096

Fits select 2004-2013 Chevrolet Caprice PPV, Pontiac G8, and GTO.

The Pedders PED-5030 Front Strut Mount Bearing is engineered as a heavy-duty replacement for worn or binding factory bearings. This component is critical for maintaining smooth steering rotation and eliminating the common "spring pop" or groaning noises associated with failing OE units. Built to satisfy the requirements of both daily commuters and performance enthusiasts, it provides an ideal balance of durability and civility.

As a direct OE replacement, this bearing installs into the factory mounting points without modification, restoring original steering feel and ensuring the suspension system operates within its intended tolerances.

• Direct OE replacement for a precise factory fit
• Heavy-duty construction designed to outlast standard replacement bearings
• Reduces steering friction and eliminates rotational noise
• Restores original steering response and suspension geometry
• Manufacturer Part Number: PED-5030

Fits 2012-2020 Subaru BRZ.

The Ohlins Front Upper Strut Mount (Left) is engineered to provide a precise, high-strength connection between the front suspension strut and the vehicle chassis. As a critical component for maintaining suspension geometry, this mount ensures that steering input is translated accurately to the road while managing the axial and radial loads generated during spirited driving. Whether you are replacing a worn OE mount or refreshing your suspension during a coilover installation, this component is designed to meet the exact tolerances required for performance handling.

• Position: Front Left (Driver Side)
• Engineered for 2012-2020 Subaru BRZ chassis
• Direct replacement or service component for Ohlins suspension systems
• Maintains precise alignment and steering response
• High-durability construction to withstand performance damping loads
• Manufacturer Part Number: 25633-43

Fits select 1988-1998 Chevrolet and GMC C1500 and C2500 2WD models.

When lowering your 1988-1998 GM truck by 5 to 6 inches, the factory rear shock absorber angle becomes compromised, often resulting in poor damping performance and limited travel. MaxTrac rear shock angle correctors (also known as shock extenders) relocate the mounting points to restore proper shock geometry. By repositioning the shocks to a more vertical orientation, these extensions improve ride quality and ensure your dampers can effectively manage suspension movement on heavily dropped applications.

• Specifically designed for vehicles with 5-inch to 6-inch rear drops
• Restores efficient shock angle for improved damping and suspension travel
• Manufactured from heavy-duty steel with a durable grey powder-coated finish
• Compatible with both 5-lug and 6-lug 2WD chassis
• Direct bolt-on installation using included hardware
• Manufacturer Part Number: 400500
• Includes: (2) Shock Extenders, Installation Hardware

Fits 2017-2021 Tesla Model 3 (Base, Long Range, Performance, and Standard Plus).

Restore original ride quality and steering precision with the KYB SM5991 Front Strut Mount Kit. As a critical link between the strut assembly and the vehicle chassis, the strut mount is responsible for insulating road noise and vibration. Worn mounts often result in clunking noises, steering binding, or increased vibration. This kit is engineered to meet or exceed OE specifications, ensuring a perfect fit and factory-level performance.

• Replaces worn or hardened front strut mounts to eliminate suspension noise
• Dampens road vibrations and harshness for a smoother ride
• Maintains proper suspension alignment for improved tire wear and handling
• Manufacturer Part Number: SM5991
• Position: Front

Vehicle Fitment

Fits select 2017-2021 Subaru Ascent, Impreza, Legacy, and Outback models.

The KYB SM5937 Strut Mount is an OE-quality replacement designed to restore your vehicle's original handling characteristics and ride comfort. Over time, factory vibration insulators harden and lose their ability to dampen road noise; this replacement mount eliminates that harshness by cushioning impacts from road bumps. As a critical steering pivot, the integrated front bearing plate supports the vehicle's weight while ensuring precise steering performance and maintaining proper wheel alignment.

• Eliminates vibration and cabin noise caused by worn, hardened insulators
• Optimizes suspension geometry by providing a stable mounting point
• Front bearing plate serves as a high-performance steering pivot
• Cushions road impacts to reduce jarring effects on the chassis
• Includes matched grade studs and nuts for a secure fit
• Manufacturer Part Number: SM5937

Fits select 2016-2022 Toyota Prius, Corolla, C-HR, and Lexus UX200/UX250h. This KYB Strut Mount Kit (SM5913) replaces worn or hardened vibration insulators to restore original suspension performance and eliminate unwanted road noise. As the critical connection point between the strut and the vehicle chassis, this front mount kit ensures proper steering pivot and supports the full weight of the vehicle for accurate wheel alignment.

• Eliminates vibration and jarring noise caused by aged OE rubber insulators
• Restores steering precision by providing a smooth, stable pivot for the front suspension
• Includes matched-grade studs and nuts for a secure installation
• Designed to meet or exceed original equipment tolerances for each specific application
• Part Number: SM5913

Fits select 2013-2022 Mazda 3, 6, CX-3, CX-5, and CX-9, 2016 Scion iA, and 2017 Toyota Yaris iA.

The KYB SM5884 Front Strut Mount is an OE-quality replacement engineered to eliminate the vibration and cabin noise caused by aged or hardened factory insulators. As a critical steering pivot point, this mount supports the vehicle's weight and maintains correct wheel alignment for predictable handling. By cushioning road impacts, it reduces the jarring effects and harshness transmitted into the chassis through the suspension system.

• Precision Engineering: Designed for specific Mazda, Scion, and Toyota chassis to restore factory steering performance.
• Noise Suppression: Optimizes suspension dampening by replacing worn, hardened vibration insulators.
• Durability: Features matched-grade studs and nuts to ensure a secure, reliable installation.
• Integral Component: The front bearing plate serves as the steering pivot, essential for smooth wheel rotation and alignment stability.

Specifications:

• Manufacturer Part Number: SM5884
• Position: Front
• Included Hardware: Matched grade studs and nuts

Fits select 2014-2019 Ford Fiesta models including S, SE, ST, ST Line, and Titanium.

The KYB SM5880 Strut Mount Kit is engineered to eliminate the harsh vibration and road noise caused by aged, hardened vibration insulators. As a critical component of your vehicle's front suspension, these mounts act as the steering pivot and support the full weight of the vehicle. Replacing worn mounts is essential for maintaining correct wheel alignment and restoring factory steering performance.

Designed as an OE-quality replacement, this kit cushions road impacts to reduce the jarring effects transmitted into the chassis. Whether you are refreshing a high-mileage daily driver or maintaining a performance-oriented ST, these mounts provide the structural integrity required for precise handling and a quiet cabin.

• Replaces worn or hardened original equipment insulators
• Serves as the primary steering pivot for front suspension
• Reduces noise, vibration, and harshness (NVH) levels
• Critical for maintaining proper wheel alignment and tire wear
• Includes necessary bearing plate components for a complete service
• Manufacturer Part Number: SM5880

Fits select 2012-2019 Ford Explorer, Flex, Taurus, Police Interceptor, and Lincoln MKS and MKT.

The KYB SM5869 Front Strut Mount is engineered to eliminate the vibration and road noise caused by aged, hardened, or failed vibration insulators. As a critical component of your front suspension, this mount cushions road impacts to reduce jarring effects while serving as the essential steering pivot point that supports the vehicle's weight and maintains alignment geometry.

Designed to restore original equipment performance, this mount features matched grade studs and nuts to ensure a secure, high-integrity installation. Replacing worn mounts is vital for maintaining steering precision and extending the life of your struts.

• Manufacturer Part Number: SM5869
• Position: Front
• Hardware Included: Matched grade studs and nuts
• Performance: Reduces noise, vibration, and harshness (NVH)
• Build Quality: Application-specific OE replacement component

Fits select 2015-2024 Audi A3, S3, TT, and Volkswagen Golf, GTI, Jetta, and Tiguan models.

The KYB SM5867 Front Strut Mount is an OE-quality replacement designed to restore your vehicle's original handling and ride comfort. By replacing a worn or hardened vibration insulator, this mount eliminates the clunking noise and jarring vibrations typically transmitted into the cabin during suspension travel. As the primary steering pivot and weight-bearing component for the front assembly, this mount is critical for maintaining proper wheel alignment and steering response.

• Eliminates vibration and road noise caused by aged, hardened insulators
• Optimizes suspension performance with application-specific engineering
• Serves as the critical steering pivot point for front-end alignment
• Cushions road impacts to reduce the jarring effect on the chassis
• Includes matched grade studs and nuts for a secure, reliable installation
• Manufacturer Part Number: SM5867

Fits select 2014-2020 Cadillac Escalade, Chevrolet Silverado/Tahoe/Suburban, and GMC Sierra/Yukon.

The KYB SM5861 Front Strut Mount is an OE-quality replacement designed to eliminate the vibration and noise caused by hardened or damaged factory vibration insulators. As a critical component of your vehicle's front suspension, this mount cushions road impacts and provides a stable steering pivot through its integrated bearing plate, directly affecting wheel alignment and steering response.

• Optimized Performance: Engineered for application-specific damping to reduce the jarring effects of road bumps and cabin noise.
• Steering Integrity: Includes high-quality bearing plates that act as the primary steering pivots and support the vehicle weight.
• Complete Hardware: Supplied with matched-grade studs and nuts to ensure a secure, factory-spec installation.
• Direct Fit: Replaces worn or hardened OE mounting components to restore original ride quality and handling precision.
• Manufacturer Part Number: SM5861

Fits select 2012-2020 Ford C-Max, Escape, Focus, Transit Connect, and Lincoln MKC.

Restore factory-level ride quality and steering precision with the KYB SM5815 Front Strut Mount. Over time, original vibration insulators harden and degrade, leading to increased road noise, jarring impacts, and compromised wheel alignment. This OE-quality replacement is designed specifically to isolate the chassis from suspension harmonics while providing a stable pivot point for the steering system.

As a critical load-bearing component, this front mount features an integrated bearing plate that serves as the primary steering pivot. Replacing worn mounts during strut service ensures optimal suspension travel and prevents premature wear on new dampers. This unit is built to exact tolerances to maintain proper alignment geometry and vehicle handling characteristics.

• MPN: SM5815
• Position: Front
• Function: Eliminates vibration, jarring road noise, and steering play
• Hardware Included: Matched grade studs and nuts
• Design: Application-specific OE replacement for precise fitment and alignment retention

Fits select 2011-2022 Ford EcoSport, Ford Fiesta, and Mazda 2.

The KYB SM5802 Rear Strut Mount is an OE-quality replacement designed to restore your vehicle's original handling characteristics. Over time, original vibration insulators harden and crack, allowing road noise and jarring impacts to transmit into the cabin. This mount replaces those worn components to eliminate rattles and optimize suspension performance.

Built to precise tolerances, this rear mount serves as the critical connection point between the strut assembly and the vehicle chassis. It features high-grade rubber damping material to cushion road shocks and maintain proper suspension alignment. Each unit is engineered for application-specific fitment, ensuring the mounting points and hardware match factory specifications for a straightforward installation.

• Part Number: SM5802
• Location: Rear
• Performance: Reduces noise, vibration, and harshness (NVH)
• Quality: Matches or exceeds OE material specifications
• Hardware: Includes matched-grade studs and nuts where required

Vehicle Fitment: