Fits 2015-2020 Acura TLX models.

The RS-R Sports-i Series Coilovers (XSPIH900M) are engineered for the enthusiast who demands a spirited driving experience without sacrificing the daily ride quality of their luxury sedan. This suspension system replaces the factory strut and spring assemblies with precision-tuned dampers designed to reduce body roll and improve steering response while maintaining a compliant feel on the street.

As part of the RS-R Sports-i lineup, these coilovers feature high-quality internal components and mono-tube shock construction to ensure consistent performance under varying temperatures. Whether you are looking to eliminate wheel gap or fine-tune your cornering stability, this kit provides the adjustability needed to achieve your desired stance and handling balance.

• Mono-tube shock design for superior heat dissipation and damping consistency
• Adjustable ride height and damping to suit individual driving preferences
• Engineered specifically for the Acura TLX chassis for a direct-fit installation
• High-strength materials used for longevity and resistance to the elements
• Manufacturer Part Number: XSPIH900M

Fits 2016-2024 Infiniti Q50 Red Sport 400 AWD models equipped with factory Digital Dynamic Suspension (DDS).

The RS-R Best-i Active coilovers are engineered for drivers who want to lower their vehicle and improve handling without sacrificing the sophisticated factory electronic damping controls. Unlike traditional aftermarket coilovers that require a canceler or delete kit, the Best-i Active series integrates directly with the Infiniti DDS system. This allows you to retain full functionality of your in-cabin drive mode selector while gaining the benefits of a performance coilover setup.

• Manufacturer Part Number: XLIN145MA
• Chassis Compatibility: V37 (AWD models only)
• System Retention: Compatible with factory Digital Dynamic Suspension (DDS)
• Design: Mono-tube internal construction for rapid heat dissipation and consistent damping
• Adjustment: Full-length ride height adjustment allows for corner balancing without altering spring preload
• Build: Utilizes high-quality components to minimize friction and noise

Fits 2017-2022 Honda Civic Type R (FK8).

The RS-R Best-i Active series is a premium suspension solution engineered for vehicles equipped with factory electronic damping. Unlike traditional coilovers that require a delete kit, these units are designed to integrate directly with the Honda Adaptive Damper System (ADS). This allows you to retain full functionality of your factory drive mode controls while benefiting from the precision of a performance-tuned mono-tube shock.

By replacing the original struts and springs with this hand-assembled kit, you can fine-tune your Civic Type R's ride height and center of gravity for improved cornering stability and steering response. Each set utilizes RS-R's advanced damping technology to provide a balance of street comfort and track-ready performance.

• Retains factory Honda Adaptive Damper System (ADS) functionality
• Mono-tube shock construction for superior heat dissipation and consistent damping
• Fully adjustable ride height for precise vehicle weighting and stance
• Built with high-grade components to ensure long-term durability and performance
• Engineered for a direct-fit installation on the FK8 chassis
• Manufacturer Part Number: XBIH059MA

Fits 2023 Honda Civic Type R (FL5).

The RS-R Best-i Active series is the premier solution for the FL5 Civic Type R owner looking to lower their vehicle while maintaining the factory electronic suspension controls. Unlike standard coilovers that require electronic dampers to be disabled or bypassed, these coilovers are engineered to integrate directly with the Honda Adaptive Damper System (ADS).

By utilizing RS-R’s internal damping technology, this kit allows you to retain your cabin-selected drive modes while gaining the performance benefits of a full-length adjustable coilover. This setup provides superior handling, reduced body roll, and a customized stance without sacrificing the sophisticated factory suspension logic.

• Retains factory Adaptive Damper System (ADS) functionality
• Full-length adjustability for precise ride height and spring preload settings
• Mono-tube internal design for consistent performance and heat management
• Includes all necessary hardware for installation
• Manufacturer Part Number: XBIH034MA

Fits 1967-1969 Chevrolet Camaro and Pontiac Firebird models (V8 Small Block and LS-Series).

Upgrade your first-generation GM F-Body with the QA1 Level 1 Handling Kit, a performance-oriented suspension solution designed for bolt-in installation. This kit is specifically engineered to replace worn OE components with high-strength tubular parts and adjustable valving, providing significantly better handling and straight-line stability without sacrificing street comfort.

At the core of this kit are single-adjustable shocks that allow you to fine-tune your rebound settings to match your specific driving preferences. The spring rates have been carefully selected for average-weight small block and LS-powered vehicles, ensuring a smooth ride while eliminating the float and body roll typical of factory 1960s suspension. Because the components are designed to work with factory mounting points, you can install the full kit at once or build your suspension in stages as your performance needs evolve.

• Single-adjustable valving for precise shock tuning and ride height adjustment
• Strong, lightweight tubular components for improved chassis response
• Spring rates optimized for small block and LS-swapped F-Body applications
• Direct bolt-in installation with no fabrication required
• Modular design compatible with other QA1 suspension upgrades
• Proudly made in the USA
• Manufacturer Part Number: HK21-GMF1

Fits 1994-1996 Buick Roadmaster, Chevrolet Caprice, and Chevrolet Impala SS.

Improve the cornering performance and stance of your GM B-Body with the QA1 Level 1 Handling Kit 2.0. This entry-level performance suspension system is engineered specifically for street use, providing a significant upgrade over aged factory components without compromising ride quality. Designed as a direct bolt-in solution, these components mount to factory locations for a straightforward installation that can be completed in stages as your build progresses.

The kit features carefully selected spring rates optimized for average-weight small block and LS-swapped B-Bodies in stock trim. By replacing heavy, stamped-steel factory arms with strong, lightweight tubular components, you reduce unsprung weight and improve suspension geometry for better turn-in and high-speed stability. The included shock absorbers are valved to provide a smooth, controlled ride while maintaining consistent performance under load.

• Manufacturer Part Number: HK21-GMB5
• Application: 1994-1996 GM B-Body platform
• Kit Level: Level 1 Handling Kit 2.0
• Direct bolt-in installation with no cutting or welding required
• Compatible with original equipment mounting points
• Includes performance-tuned shocks and tubular suspension components
• Spring rates optimized for small block and LS engine configurations
• Proudly made in the USA

Fits 1977-1990 GM B-Body vehicles.

The QA1 Level 2 Big Wheel Kit (BW02-GMB5) is a comprehensive suspension solution engineered specifically for high-risers and cars running oversized wheels. This kit solves the common fitment issues associated with large diameter wheels by providing the adjustability needed to center the wheels within the wheel wells and fine-tune the stance for optimal clearance and aesthetics.

• Adjustable Ride Height: Integrated height adjustment allows you to dial in the perfect look and ensure proper fender clearance for your specific wheel and tire combination.
• On-the-Car Shock Adjustments: Features adjustable shocks at all four corners, allowing you to tune damping rates without removing the components from the vehicle.
• Tubular Control Arms: Replaces factory stamped-steel arms with high-strength tubular units for improved suspension geometry and durability.
• Adjustable Trailing Arms: Essential for big wheel applications, these arms allow you to precisely center the rear wheels in the wheel arch to prevent rubbing and improve handling.
• Direct Bolt-In Installation: Designed to mount to factory locations for a straightforward upgrade process.
• Made in the USA: Manufactured with precision and backed by QA1's industry-leading standards.
• Manufacturer Part Number: BW02-GMB5

Fits 2024-2025 Toyota Land Cruiser 250 Series models (1958, Base, and First Edition).

The ICON Vehicle Dynamics Stage 7 Suspension System is engineered to maximize the performance and handling of the Toyota Land Cruiser 250 Series. This comprehensive kit provides a 1.25-3" front lift and a 2" rear lift, accommodating larger tire fitments while improving off-road articulation and on-road stability. At the core of this system are 2.5 Series front coilovers and 2.5 Aluminum Series rear shocks, both featuring remote reservoirs for superior damping and heat dissipation during extended off-road use.

This Stage 7 system includes ICON’s tubular upper control arms (UCAs) equipped with the patented Delta Joint PRO, offering 90 degrees of total articulation and corrected front-end geometry. To maintain drivetrain integrity, a front differential drop is included to optimize CV joint angles. The rear suspension is overhauled with dual-rate coil springs, tubular lower links, and a billet adjustable track bar to ensure the axle remains centered and the pinion angle is correctly set.

• MPN: K53367T
• Front Lift Height: Adjustable 1.25-3" over stock
• Rear Lift Height: 2" over stock
• Shocks: 2.5 Series remote reservoir coilovers and rear shocks with 7/8" shafts
• Upper Control Arms: Tubular steel with Delta Joint PRO (U.S. Pat. 10,731,700)
• Rear Components: Billet adjustable track bar and tubular lower links with dual-durometer bushings
• Construction: 6061 aircraft-grade aluminum CNC-machined components and CAD-plated shock bodies
• Hardware: High-quality FK rod end bearings for minimal deflection

Fits 2024-2025 Toyota Land Cruiser (1958, Base, and First Edition). This ICON Stage 7 suspension system provides a comprehensive performance upgrade for the 250 Series, offering 1.25-3" of adjustable front lift and 2" of rear lift for a level, aggressive stance.

This system centers around 2.5 Aluminum Series front coilovers and rear shocks equipped with remote reservoirs for increased oil capacity and superior cooling during aggressive off-road use. The billet 6061 aluminum upper control arms utilize the patented Delta Joint PRO, which provides 90 degrees of articulation to maximize wheel travel and corrects suspension geometry for improved alignment and drivability. The rear end is fully optimized with a billet adjustable track bar to center the axle and billet lower links with FK rod ends to allow for precise pinion angle adjustment and increased articulation.

• ICON 2.5 Aluminum Series front coilovers and rear remote reservoir shocks with 7/8" shafts
• CNC machined 6061 aircraft grade billet aluminum UCAs, rear links, and track bar
• Patented Delta Joint PRO with 90 degrees of articulation for maximum travel
• Dual-rate rear coil springs for improved ride quality and bottoming resistance
• Front differential drop kit to maintain optimal CV joint angles
• Corrosion-resistant CAD plated coilover shock bodies
• On-vehicle adjustability for caster, camber, and pinion angle
• Includes all necessary hardware for installation
• Manufacturer Part Number: K53367

Fits 2015-2020 Volkswagen Golf and GTI (MK7) models equipped with 55mm front strut clamps.

The H&R Street Performance Coil Over kit (MPN: 28851-11) is an engineered suspension solution for MK7 owners who want to improve handling dynamics without sacrificing daily ride comfort. Each shock is custom-valved specifically to work with H&R precision-engineered progressive rate springs, resulting in a finely tuned system that reduces body roll and improves steering response.

These coilovers feature a fully threaded shock body that allows for precise ride height adjustments. This adjustability helps you lower the vehicle's center of gravity for better performance while allowing you to dial in the perfect stance. Manufactured in Germany to the highest standards, this kit provides a significant upgrade over factory dampening and spring rates.

• Custom Valving: Dampers are matched to progressive springs for a balance of performance and comfort.
• Height Adjustable: Threaded shock bodies allow for fine-tuned vehicle height and weight distribution.
• German Engineering: Designed and manufactured in Germany for long-term durability.
• Application Note: Only fits models with the 55mm strut clamp housing; please verify your factory strut size before ordering.
• Manufacturer Part Number: 28851-11

Fits select 2017-2026 Ford F-250 and F-350 Super Duty 4WD Diesel models with a 4-inch lift system.

The Fabtech Dirt Logic 4.0 Coilover Conversion is designed to upgrade Super Duty suspension systems, delivering superior damping capacity for rugged off-road terrain while significantly improving street ride quality. Engineered for longevity in harsh environments, this 4-inch lift coilover features a stainless steel body for maximum corrosion resistance and a NitroSteel piston rod for increased durability over standard chrome shafts.

This passenger-side specific unit is a direct bolt-on installation for vehicles already equipped with Fabtech Tubular Radius Arm or 4-Link systems. It provides the fine-tuned suspension control required for heavy-duty diesel applications.

• Part Number: FTS835242P
• 4.0-inch diameter stainless steel shock body
• Large external reservoir for increased oil capacity and cooling
• NitroSteel piston rod for superior corrosion resistance
• Bolt-on installation to factory mounting points
• Manufacturer 5-year, 60,000-mile warranty

Fits 2017-2026 Ford F-250 and F-350 Super Duty 4WD Diesel models equipped with a 4-inch lift.

The Fabtech Dirt Logic 4.0 Coilover Conversion is engineered to provide superior damping capacity and ride quality for heavy-duty applications. This driver-side reservoir coilover replaces the factory coil spring and shock assembly, offering a significant upgrade for both highway comfort and off-road performance. Each unit is constructed with a 4-inch diameter stainless steel body and a NitroSteel piston rod to ensure maximum corrosion resistance and durability in harsh environments.

• 4.0-inch diameter stainless steel body for high oil capacity and cooling
• NitroSteel piston rod provides superior strength and corrosion resistance
• External reservoir design for consistent performance during aggressive use
• Direct bolt-on installation for compatible 4-inch lift systems
• Designed specifically for Ford Super Duty 4WD Diesel applications
• Manufacturer Part Number: FTS835242D
• Backed by Fabtech's 5-year/60,000-mile warranty

Fits 2024-2025 Toyota Land Cruiser 250 Series (1958, Base, and First Edition).

The ICON Vehicle Dynamics Stage 5 suspension system is engineered for the serious driver seeking maximum off-road performance and enhanced damping control. This comprehensive kit features vehicle-specific tuned 2.5 Series front coilovers and rear shocks, both equipped with remote reservoirs. These reservoirs significantly increase oil volume and surface area for superior heat dissipation, preventing shock cavitation and damping fade during aggressive use. The front coilovers are height-adjustable from 1.25" to 3" over stock, providing clearance for larger wheel and tire packages.

To maintain proper suspension geometry and durability, this system includes ICON tubular Upper Control Arms (UCAs) featuring the patented Delta Joint Pro, capable of 90 degrees of total articulation. A front differential drop bracket is also provided to correct CV axle angles and maximize wheel travel. For the rear, dual-rate coil springs provide a 2" lift while maintaining a balanced ride quality across varied terrain.

• Manufacturer Part Number: K53365T
• Adjustable front lift height: 1.25-3" over stock; Rear lift height: 2"
• 2.5 Series front and rear shocks with remote reservoirs for maximum cooling
• Corrosion-resistant CAD-plated coilover bodies with heavy-duty 7/8" shafts
• Tubular UCAs with Delta Joint Pro (U.S. Pat. 10,731,700) for 90-degree articulation
• Front differential drop kit with polyurethane mounting bushings to limit movement
• 6061 aircraft-grade aluminum CNC-machined components
• FK Rod End bearings for reduced deflection and extended service life

Fits 1965-1979 Ford F-100 and F-150 2WD models across multiple trims including Base, Custom, Ranger, and XLT.

Enhance the stance and handling of your classic Ford truck with this pair of Ridetech HQ Series Front Coilovers. Designed specifically for 2WD 1965-1979 F-100 and F-150 applications, these coilovers are engineered for use with Ridetech suspension components to provide a modern ride quality and precise rebound adjustment. The HQ Series (Handling Quality) allows you to fine-tune the dampening to match your driving preferences and vehicle load requirements.

• Direct Fit: Designed for use with Ridetech suspension systems on select 1965-1979 Ford 2WD trucks.
• Rebound Adjustable: HQ Series shocks feature internal valving with adjustable rebound for custom-tailored handling.
• Complete Front Set: Includes a pair of high-performance shocks, springs, spring mounts, and bearing spacers.
• Durable Construction: Monotube design for consistent damping and long-term reliability under varying road conditions.
• MPN: 12313510

The APR Roll-Control Coilover System (SUS00026) is a comprehensive suspension solution for select 2015-2026 Audi A3, S3, RS3, Q3, and TT, as well as Volkswagen Arteon, Golf, GTI, Jetta, Taos, and Tiguan models. Engineered to eliminate the high center of gravity and soft response of factory MQB/MQE setups, this system provides 32 points of simultaneous rebound and compression damping adjustment, allowing you to fine-tune your vehicle for street comfort, show stance, or track performance.

This kit features high-tensile linear springs and gas-charged monotube dampers. The fully threaded shock bodies allow for independent ride height and spring preload adjustments, ensuring you can lower your vehicle without sacrificing suspension travel. To maximize handling precision, the front struts include integrated camber plates for dialing in alignment specs otherwise unavailable on the factory suspension.

• Fits select 2015-2026 Audi and Volkswagen MQB/MQE platform vehicles.
• High tensile linear springs: 448 lbs/in (Front), 280 lbs/in (Rear).
• 32-way adjustable damping (simultaneous rebound and compression).
• Independent ride height and spring preload adjustment via fully threaded bodies.
• Integrated front camber plates with high-quality spherical bearings.
• High-viscosity oil-filled, gas-charged monotube struts and dampers.
• Universal fitment: Includes collar sleeves for 50mm and 55mm front struts and rear bearing sleeves for thin or wide lower arms.
• Corrosion-resistant anodized fittings and plated components.
• Poly isolators for reduced NVH (Noise, Vibration, and Harshness).
• Includes adjustment tools, integrated bump stops, and dust boots.
• Manufacturer Part Number: SUS00026

Fits 2018-2026 Tesla Model 3 and Model Y (Long Range, Performance, and Premium AWD models).

The KW V1 Inox-Line coilover kit is engineered for drivers seeking a balanced, sporty suspension setup with pre-configured damping. This kit replaces factory struts and springs with vehicle-specific hardware developed through rigorous testing on the Nürburgring Nordschleife and the KW 7-post chassis dynamics test center. By utilizing KW's proprietary Inox-Line stainless steel technology, these coilovers provide permanent corrosion resistance and a long service life, even in extreme winter conditions.

Each kit is hand-assembled in Fichtenberg, Germany, and every individual damper is dyno-tested to ensure performance accuracy before shipment. The system allows for seamless ride height adjustment within an approved range, reducing body roll and improving handling directness while maintaining adequate suspension travel.

• Construction: Inox-Line stainless steel strut housings for 100% corrosion resistance.
• Adjustment: Dirt-resistant trapezoid threads and friction-optimized polyamide composite collars for easy height tuning.
• Protection: Elastomer bump stops with integrated dust systems protect the piston rods and seals from road debris.
• Testing: Each damper is dyno-tested and assigned a unique serial number.
• Fitment: Vehicle-specific spring rates and damping curves for AWD Tesla platforms.
• Part Number: 10287010
• Warranty: Limited Lifetime Warranty - Unlimited Mileage.

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 (2WD/4WD) models.

The Eibach PRO-TRUCK-LIFT STAGE 2 system (MPN: E86-23-032-01-22) is an engineered suspension solution for truck owners demanding increased off-road capability without sacrificing on-road stability. This system upgrades the front suspension to 2.0 coilovers utilizing an extended-travel monotube design. These coilovers feature variable force valving to provide precise control on the street and maximum traction on technical trails.

Equipped with ERO Off-Road Race Springs, the front coilovers include an adjustable threaded spring perch to allow for precise ride-height tuning, making it easy to accommodate heavier front-end loads or clear larger tire setups. Every component is built for durability, featuring 6061-T6 billet aluminum mounts and a heavy-duty bushing system that has been cycle-tested for long-term reliability. To ensure consistent performance, each coilover is individually dyno-tested and matched.

• Includes Pro-Truck Coilover 2.0 front assemblies and matched Rear Sport Shocks.
• 46mm piston monotube design with nitrogen-filled variable force valving.
• Anodized 6061-T6 billet aluminum coilover mounts for superior strength.
• Adjustable threaded spring perch for ride height customization.
• Individually dyno-tested for matched performance and reliability.
• Designed, tested, and manufactured by Eibach in the U.S.A.

Authoritative Fitment:

• 2014-2018 Chevrolet Silverado 1500 (WT, High Country, LS, LT, LTZ, SSV, Custom)
• 2014-2018 GMC Sierra 1500 (Base, Denali, SLE, SLT)

Fits 2000-2009 Honda S2000 (Base and CR).

The Bilstein B16 (PSS9) suspension system provides track-inspired handling and street-ready versatility for the Honda S2000. This kit features 9-stage manually adjustable dampers that tune both rebound and compression settings simultaneously with a single click, allowing you to dial in the perfect balance for your driving environment. Built with monotube gas-pressure technology and matched performance springs, this system replaces the factory shocks and springs with a precision-engineered coilover solution.

The threaded zinc-coated bodies allow for fine-tuned ride height adjustments, offering a lowering range of approximately 30mm to 50mm. Each kit is finished with Bilstein's Triple-C Coating for long-term corrosion resistance and is rigorously tested under motorsport conditions on the Nürburgring.

• 9-stage manual damping adjustment (rebound and compression)
• Monotube gas-pressure construction for fade-free performance
• Threaded body for 30mm to 50mm height adjustability
• Triple-C Coating for superior corrosion resistance
• Includes matched performance springs and all necessary hardware
• Manufacturer Part Number: 48-088657

Fits select 2005-2023 Dodge Charger, Challenger, Magnum, and Chrysler 300 models. Ridetech HQ Series Rear Coil-Overs provide a significant performance upgrade for the Mopar LX, LC, and LD platforms, allowing for precise fine-tuning of ride quality and handling characteristics. These rear coil-overs feature a rebound-adjustable mono-tube design, enabling you to dial in the damping to suit your specific driving style and vehicle weight.

• Rebound adjustable shocks for precise suspension tuning
• Includes high-tensile coil springs and robust spring mounts
• Delrin spring washers prevent binding and ensure quiet operation
• Mono-tube design for consistent, fade-free performance
• Direct replacement for factory rear shock and spring assemblies
• Manufacturer Part Number: 13046210

Each kit is supplied as a pair and includes all necessary hardware for installation: two rebound-adjustable shocks, two coil springs, spring mounts, and Delrin spring washers.

Fits the 2014 Chevrolet SS Base.

The H&R Street Performance Coil Over system (MPN 50755) is an engineered suspension solution designed for drivers seeking a balance of refined handling and adjustable ride height. Each kit features shocks custom-valved to work specifically with H&R precision-engineered progressive rate springs, creating a cohesive, tuned system for the 2014 Chevrolet SS chassis.

• Fully threaded shock bodies for precise vehicle height adjustment and weight balancing
• Lowers the center of gravity for improved cornering performance and control
• Custom-valved dampers paired with progressive rate springs for optimized suspension travel
• Precision-engineered and manufactured in Germany
• Direct-fit application replacing factory spring and shock assemblies

Fits 2010-2014 Ford F-150 SVT Raptor models.

Experience professional-grade damping with this King Shocks OEM Performance kit, specifically engineered to replace factory components with a bolt-on 3.0-inch diameter coilover system. These shocks are custom-tuned to provide the optimal damping curve and spring rate for the SVT Raptor chassis, having undergone extensive real-world testing to ensure superior ride quality and control in demanding off-road environments.

The external remote reservoir significantly increases oil capacity to better manage heat during aggressive driving, while the integrated compression adjuster allows you to fine-tune your suspension's firmness with a simple turn of a knob. Built with the high-quality materials and tolerances expected from King Shocks, this kit is designed for drivers who require consistent performance without fade.

• Bore Diameter: 3.0 inches
• Reservoir Type: Remote Reservoir
• Adjustment: Built-in Compression Adjuster
• Position: Front (Left and Right Pair)
• Mounting: Direct bolt-on to factory locations
• Manufacturer Part Number: 30001-407

Fits select 2005-2021 Nissan Frontier, 2005-2012 Nissan Pathfinder, and 2005-2015 Nissan Xterra. This 2.0 Performance Series IFP coilover shock is designed to improve off-road capability by extending drop-out travel while maintaining superior on-road comfort. The metal-impacted 6061-T6 aluminum body dissipates heat four times faster than conventional steel, providing fade-resistant performance even in harsh environments.

The Internal Floating Piston (IFP) design separates the shock oil from the high-pressure nitrogen gas, preventing oil aeration and ensuring consistent valving performance. Built for long-term durability, these shocks feature CNC-machined black anodized components and Teflon-lined, heat-treated spherical bearings. These coilovers provide 0-2 inches of lift and are fully serviceable and tunable for a lifetime of use.

• Internal Floating Piston (IFP) technology separates gas and oil
• 6061-T6 aluminum body for superior heat dissipation and corrosion resistance
• Supports 0-2 inches of front lift height
• Redundant sealing system for long-lasting performance
• Teflon-lined, heat-treated alloy steel spherical bearings
• 4.325-inch stroke length
• Includes aluminum reservoir clamp
• Manufacturer Part Number: 983-02-054

Fits 1967-1970 Ford Mustang models including Base, Boss 302, Boss 429, Grande, Mach 1, and Shelby GT-350/500/500KR.

Upgrade your classic Ford Mustang’s rear suspension with the Ridetech HQ Series Rear CoilOvers. These Handling Quality (HQ) shocks are specifically engineered for use with Ridetech 4-Link rear suspension systems, providing a significant improvement in ride quality and cornering performance. The monotube design offers consistent damping, while the rebound adjustment allows you to fine-tune the suspension to your specific driving preferences and vehicle weight.

• Specifically designed for use with Ridetech 4-Link rear suspension systems.
• Adjustable rebound damping to dial in handling and ride comfort.
• Delrin spring washers included to eliminate spring binding and noise.
• High-tensile steel coil springs included for reliable performance and stance.
• Manufacturer Part Number: 12106510

What's Included: (2) Rebound adjustable shocks, (2) coilover springs, spring mounts, and Delrin spring washers.

Fits 2009-2024 Nissan GT-R (R35) models, including Premium, Nismo, Track Edition, and Black Edition submodels.

The KW V3 (Variant 3) Coilover suspension kit is engineered for performance-oriented drivers seeking technical control over their vehicle's handling dynamics. Utilizing state-of-the-art motorsports technology, this kit provides independent adjustment for both compression and rebound damping, allowing for a precise setup tailored to specific tire characteristics, vehicle weight, and driving conditions. Each kit is hand-built at KW headquarters in Fichtenberg, Germany, and every damper is dyno-tested to ensure accuracy before shipping.

• TVR-A (Twin Valve Rebound - Adjustable): Features a conical low-speed bypass for comfort during slow damper speeds, while the main rebound valve opens at high speeds to manage large fluid displacements.
• TVC-A (Twin Valve Compression - Adjustable): Patented compression valve technology allows for fine-tuning of low-speed compression while maintaining a high-speed blow-off feature to maximize grip and prevent harshness.
• Inox-Line Stainless Steel: Provides permanent corrosion resistance and an unlimited lifespan, ensuring the spring perches remain adjustable even after years of exposure to the elements.
• Composite Spring Perches: Friction-optimized polyamide composite perches with stainless steel inserts prevent oxidation and ensure high-strength durability.
• Precision Engineering: Includes elastomer bump stops with integrated dust protection to shield the piston rod and seals from contaminants.
• Manufacturer Part Number: 35285006

Fits select 2021-2023 Chevrolet Tahoe, Suburban, and GMC Yukon / Yukon XL models.

The ICON Vehicle Dynamics Stage 2 suspension system is engineered to significantly enhance the performance and ride quality of GM's latest full-size SUV platform. This system focuses on increasing wheel travel and damping capability for superior control both on-road and in rugged off-road environments. The Stage 2 upgrade features vehicle-specific tuned 2.5 Series front and rear coilover shocks with internal reservoirs, providing consistent cooling and a 20% increase in front wheel travel compared to factory components.

For improved durability and alignment accuracy, this kit includes ICON Billet Aluminum Delta Joint upper control arms. These arms allow for on-vehicle caster and camber adjustment, essential for maintaining factory alignment specs at increased ride heights. The package is completed with fabricated rear toe links to ensure proper rear-end alignment and optimal handling. These coilovers are height-adjustable, allowing for larger wheel and tire combinations while maintaining a balanced, vehicle-specific valving.

• Fits 2021-2023 Chevrolet Suburban, Tahoe, and GMC Yukon / Yukon XL
• Adjustable front lift height: 2.5-3.25”
• Adjustable rear lift height: 3-4”
• Billet aluminum upper control arms with Delta Joint ball joints
• 2.5 Series coilovers with 7/8" shafts and CAD plated shock bodies
• Internal nitrogen reservoirs for consistent damping
• Fabricated rear toe links for precise rear alignment
• FK Rod End bearings for minimal deflection and longevity
• Fully rebuildable and re-tunable shocks
• Compatible with Magnetic Ride and Adaptive Air Ride configurations
• Manufacturer Part Number: K73102

Fits 2007-2021 Toyota Tundra (Base, SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail, and Nightshade).

The ICON Stage 9 suspension system is a complete handling overhaul for the 2007-2021 Toyota Tundra, engineered to provide 1-3 inches of front lift height and superior damping across varied terrain. This system features vehicle-specific tuned 2.5 Series front coilover shocks and 2.5 Aluminum Series RXT rear shocks, both equipped with ICON’s CDC (Compression Damping Control) Valve. The CDC Valve offers 10 user-adjustable settings to fine-tune ride quality based on cargo weight and terrain. Front tubular upper control arms (UCAs) are included to increase droop travel and maintain proper alignment at increased ride heights.

To address rear suspension performance, this kit includes ICON RXT multi-rate leaf springs. These springs feature a user-adjustable design with an extra leaf that can be added or exchanged to compensate for heavy bed loads, such as roof-top tents or bed racks. The accompanying RXT rear shocks utilize a unique side-mounted lower eyelet, allowing for increased travel while still utilizing the factory mounting locations. Every shock in this system is fully rebuildable and revalveable for long-term serviceability.

• Adjustable coilovers provide 1-3" of front lift height
• 2.5 Series remote reservoir shocks with 7/8" shafts for superior heat dissipation
• CDC Valve technology with 10 compression damping settings
• ICON RXT multi-rate leaf springs with 3 user-adjustable spring rates
• Tubular upper control arms increase front droop travel
• FK Rod End bearings for durability and reduced deflection
• 6061 aircraft-grade aluminum CNC machined components
• Corrosion-resistant CAD plated coilover bodies and galvanized leaf separators
• 100% Bolt-on system; no cutting or welding required
• Manufacturer Part Number: K53029T

Fits 2007-2021 Toyota Tundra models including SR, SR5, Limited, Platinum, 1794 Edition, and TRD Pro.

The ICON Stage 9 suspension system is a high-performance, bolt-on upgrade designed to provide the ultimate in ride quality and adjustability for the 2007-2021 Toyota Tundra. This system features ICON’s 2.5 Series front coilovers and 2.5 Aluminum Series RXT rear shocks, both equipped with the Compression Damping Control (CDC) Valve. This 10-position adjuster allows you to quickly dial in compression settings to match your vehicle's cargo weight or the terrain, from smooth highway driving to aggressive off-road use.

The front coilovers are height-adjustable from 1-3 inches and are paired with ICON Billet Upper Control Arms to maximize droop travel and accommodate larger wheel and tire combinations. To manage the rear, the system includes RXT multi-rate leaf springs, which offer three user-selectable spring rates to handle varying loads such as bed racks, rooftop tents, or spare tires without sacrificing ride comfort. The rear shocks utilize a unique side-mount eyelet to increase travel while utilizing factory mounting locations.

• Adjustable coilovers provide 1-3" of front lift height
• 10-position CDC Valve for quick compression damping adjustments
• 6061 billet aircraft-grade aluminum CNC machined upper control arms
• RXT multi-rate leaf springs with 3 user-adjustable spring rates
• 2.5 Aluminum Series remote reservoir rear shocks with 7/8" shafts
• Corrosion-resistant CAD plated coilover bodies and galvanized leaf separators
• FK Rod End bearings for extended longevity and minimal deflection
• 10" aluminum reservoirs for increased oil volume and heat dissipation
• Fully rebuildable and revalveable shock components
• Manufacturer Part Number: K53029

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Eibach Pro-Truck Coilover 2.0 system is engineered to provide superior control during on-road transit while maintaining the compliance necessary for maximum traction on the trails. This front coilover kit utilizes an extended-travel monotube design paired with nitrogen-filled variable force valving to adapt to changing terrain. Each unit comes pre-assembled with Eibach ERO Off-Road Race Springs, allowing for a direct-fit, bolt-on installation without the need for additional parts or spring compressors.

• Adjustable threaded spring perch to accommodate increased loads and provide maximum tire clearance.
• Monotube shock design with a 46mm piston for consistent damping performance.
• Anodized 6061-T6 billet aluminum mounts for high strength and corrosion resistance.
• Heavy-duty bushing system cycle-tested for long-term durability.
• Individually dyno-tested to ensure matched performance across the pair.
• Engineered, tested, and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-23-032-01-20

Fits select 2006-2013 BMW 325i, 328i, 330i, and 335d (E90 Sedan / E92 Coupe).

The ST Suspensions ST X Coilover kit is engineered for drivers who demand improved cornering performance without sacrificing daily driveability. Leveraging world-class damping technology from KW Automotive, these coilovers feature vehicle-specific spring rates and damper valving to ensure a balanced, sporty ride. Each strut housing is constructed from galvanized zinc-plated steel for maximum corrosion resistance, paired with a friction-optimized polyamide composite spring perch with a stainless steel insert to prevent oxidation and ensure long-lasting height adjustability.

Every ST X kit is hand-assembled in Fichtenberg, Germany, and verified on a shock dyno to ensure consistent performance. The system utilizes a hardened chrome piston rod, a multi-layered pressure-resistant sealing package, and a mono-block guide system to maintain integrity under high-load conditions while protecting internal valve packs from dirt and particulates.

• Precision Engineering: Dampers and spring rates tuned specifically for the BMW E90 and E92 chassis.
• Seamless Height Adjustment: Features a unique trapezoidal thread pitch and composite perches for easy ride height tuning.
• Corrosion Resistance: Galvanized steel housings and composite perches prevent seizing and oxidation.
• High-Grade Components: Hardened chrome piston rods and resilient elastomer bump stops with integrated dust protection.
• Quality Tested: Hand-built by KW and shock-dyno tested before packaging.
• Manufacturer Part Number: 13220032
• Warranty: 5-Year Limited Warranty (Unlimited Mileage)

Fits 2008-2013 Cadillac CTS and CTS-V models equipped with factory magnetic ride control.

The KW Variant 3 (V3) coilover kit is engineered for performance-oriented drivers who demand precise control over their Cadillac's handling dynamics. By replacing the factory magnetic ride dampers with KW's patented twin-valve technology, this kit significantly reduces body roll, pitching, and squat during aggressive maneuvers while providing an extensive range of damping adjustability to suit any driving style or tire setup.

Built for longevity, each kit features KW Inox-Line stainless steel strut housings for permanent corrosion resistance. These are paired with friction-optimized polyamide composite spring perches reinforced with stainless steel inserts, ensuring that ride height adjustments remain smooth even after years of use in harsh conditions.

• TVR-A (Twin Valve Rebound - Adjustable) technology: Allows for independent low-speed rebound tuning for steering precision and comfort.
• TVC-A (Twin Valve Compression - Adjustable) technology: Features a patented compression valve for fine-tuning low-speed damping to maximize tire grip and cornering behavior.
• Inox-Line stainless steel construction for maximum durability and unlimited lifespan.
• High-resilient elastomer bump stops with integrated dust protection to preserve piston rod seals.
• Hand-built and dyno-tested in Fichtenberg, Germany to ensure exact tolerances.
• Manufacturer Part Number: 35263003