Need some extra lift for your YJ Wrangler? This Rugged Ridge shackle kit comes complete with two front and two rear greasable shackles, providing 1 in. extra lift.

• Limited 5 Year Warranty
• Greaseable
• Heavy Duty

This Part Fits:

This pair of HD easily greased front and rear leaf spring shackles from Rugged Ridge fit the front or rear axles on 55-75 Jeep CJ5 and CJ6. Provide 1 in. of lift. No bushings included. Bolt on application. No drilling required.

• Limited 5 Year Warranty
• Adds 1 in. of Lift
• Direct Fit
• Steel
• Pair

This Part Fits:

Bring your recovery gear into the 21st century with Rugged Ridge Soft Rope Shackles. Constructed of an ultra-strong HMPE rope material, these shackles are considerably stronger than steel with a 30,000 lb. breaking strength and, unlike nylon they actually repel water, resist abrasions, and have very low elasticity making them the obvious choice for off-road recovery. Unlike rigid steel shackles, Rugged Ridge Soft Rope Shackles are always pliable so they can be manipulated easily in tight spaces, even wearing gloves, allowing for painless attachment to tow hooks or recovery points. Better yet, Rugged Ridge Soft Rope Shackles won't ever rust, nor will they open under load however, they can be opened easily once a load is removed, making them an ideal addition to your off-road recovery gear.

• Limited 5 Year Warranty
• Adds 1 in. of Lift
• Direct Fit
• Steel
• Pair

Put an end to the loud clanging and banging of your d-ring shackles for good AND look great doing it! Rugged Ridge D-Ring Isolators are designed to isolate all portions of recovery shackles from contacting your bumper, virtually eliminating the obnoxious noise from your off-road rig. Molded of energy-absorbing polyurethane, these D-ring isolators easily snap over the outer perimeter of your shackle providing complete protection from contact with nearby surfaces while the included urethane washers isolate between the shackle pin and the mounting tab for total coverage. Rugged Ridge D-Ring isolators are available for both 3/4 and 7/8 in. shackles and are molded in a variety of colors to suit your individual tastes or paint scheme: Black, Red, Green, Yellow and, yes, Pink. (Sold in pairs- 2 isolators / 4 washers)

• 3-pc. Design Total Protection From Metal To Metal Contact
• Eliminate Undesirable Noises Common w/Bumper D-Rings
• Unparalleled Isolation And Simple Installation
• Molded Energy-absorbing Polyurethane
• Available In Variety Of Colors
• 5 Year Limited Warranty

Put an end to the loud clanging and banging of your d-ring shackles for good AND look great doing it! Rugged Ridge D-Ring Isolators are designed to isolate all portions of recovery shackles from contacting your bumper, virtually eliminating the obnoxious noise from your off-road rig. Molded of energy-absorbing polyurethane, these D-ring isolators easily snap over the outer perimeter of your shackle providing complete protection from contact with nearby surfaces while the included urethane washers isolate between the shackle pin and the mounting tab for total coverage. Rugged Ridge D-Ring isolators are available for both 3/4 and 7/8 in. shackles and are molded in a variety of colors to suit your individual tastes or paint scheme: Black, Red, Green, Yellow and, yes, Pink. (Sold in pairs- 2 isolators / 4 washers)

• 3-pc. Design Total Protection From Metal To Metal Contact
• Eliminate Undesirable Noises Common w/Bumper D-Rings
• Unparalleled Isolation And Simple Installation
• Molded Energy-absorbing Polyurethane
• Available In Variety Of Colors
• 5 Year Limited Warranty

This pair of 3/4- in. D-Ring Shackles from Rugged Ridge is rated to 9,500 lbs. with a screw-pin design making them essential for effective vehicle recovery. Constructed of high-strength forged steel and Black powder-coated, these d-ring shackles are built to deliver in off-road conditions while looking good doing it. No recovery gear kit is complete without a set of D-rings, suitable for temporary connections of straps, snatch blocks and pulleys for safe and efficient vehicle recovery. Keep an extra set on hand so you are equipped for anything. Sold in pairs.

• 9500 pound weight limit
• Limited 5 Year Warranty
• 3/4 inch pin
• Black
• Pair

This pair of heavy duty powder-coated red D-shackles from Rugged Ridge have a 7/8- in. pin and a 13,500 pound working load limit (WLL) and are the shackles you will need for recovering full size trucks and Hummers.

• 13500 lb Pull Capacity
• Galvanized Steel
• 7/8 inch
• Pair
• Red

This pair of black D-shackles from Rugged Ridge have a 1- in. pin and a 13,500 pound Working Load Limit (WLL).

• 13500Lb Pull Capacity
• Galvanized Steel
• 7/8 in.
• Black
• Pair

This pair of black 3/4- in. D-shackles from Rugged Ridge are rated to 9,500 lbs. and are the shackles youll need for recovering stuck Jeeps.

• 9500Lb Pull Capacity
• Galvanized Steel
• 3/4 in.
• Black
• Pair

Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive. This replacement leaf spring shackle kit fits 87-95 Wrangler YJ models. Kit includes 2 shackle brackets, 4 bushings, 2 sleeves, 2 bolts, 2 nuts and washers. One shackle kit does one spring- use 4 per vehicle. Replaces OE 52040415K

• Limited 5 Year Warranty
• 1 Shackle And Bushings
• Direct Fit
• OE Style

This Part Fits:

Omix proudly offers a vast collection of OE quality replacement parts for Jeep & Willys vehicles to help keep the Jeep legend alive. This replacement greaseable shackle kit fits 41-45 MB/GPW, 46-49 CJ2A, 49-53 CJ3A, 50-52 M38, , 53-60 CJ3B and 55-60 CJ5 / CJ6 models. Features left hand thread for use on front left and right rear. Sold individually- two required per vehicle. For Right Hand Thread Shackle, use 18270.13. Replaces OE 802061

• Limited 5 Year Warranty
• Left Hand Thread
• Direct Fit
• OE Style

This Part Fits:

MAX TRAC SUSPENSION'S PART# 715310 IS A PAIR OF 1" REAR LIFT SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY

• Urethane Bushings For Less Binding

This Part Fits:

MAX TRAC SUSPENSION'S PART# 713210 IS A PAIR OF 1" REAR LIFT SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY

• Maintains Factory Ride Quality

This Part Fits:

MAX TRAC SUSPENSION'S PART# 712120 IS A PAIR OF 2" REAR SHACKLES FABRICATED FROM STEEL & POWDER COATED GREY

• Urethane Bushings For Less Binding

This Part Fits:

2in. rear lowering shackles come complete with greasable bushings and sleeves along with zerk fittings. Powdercoated grey to eliminate rust.

• Zerk Fittings

This Part Fits:

1in. rear lowering shackles come complete with greaseable bushings and sleeves along with zerk fittings. Powder coated grey to elimate rust.

• Powder Coated In Our Signature Gunmetal Grey

This Part Fits:

2in. rear lowering shackles come complete with greasable bushings and sleeves along with zerk fittings. Powdercoated grey to eliminate rust.

• Urethane Bushings For Less Binding

This Part Fits:

Leaf Spring Shackle Kit; 2 in. Lowering; Rear; Powder Coated Grey; Incl. Greasable Bushings/Sleeves Along w/Zerk Fittings

• Urethane Bushings For Less Binding

This Part Fits:

2in. rear lowering shackles come complete with greasable bushings and sleeves along with zerk fittings. Powder coated grey to eliminate rust.

• Some Makes And Models These Can Be Used As Lift Shackles

This Part Fits:

Fine tune the rear ride height on your 2010-2025 Ford F-150 with ICON Vehicle Dynamics’ Billet Aluminum Lowering Shackle Kit. CNC machined from 6061 aviation grade aluminum; these billet shackles offer increased strength compared to the thin steel of the stock units to better withstand the stresses of aggressive off-road use. Their increased length also lowers the rear ride height of the truck by 1”, requiring less front lift to achieve a level stance or to assist in rear ride height tuning with aftermarket leaf springs. Their gusseted design ensures proper bushing clearance to allow fitment for stock leaf springs, ICON F-150 Multi-Rate Leaf Springs, and most other aftermarket spring packs for a wide range of suspension setup options. Pre-installed, replaceable, press in OE Ford bonded bushings make for an easy install, require no periodic greasing, and offer noise free operation while still cycling full suspension travel. The shackles look as great as they perform with a satin gray anodized finish.

• Features mantenance free, replaceable OE Ford bonded bushings
• CNC machined from 6061 aircraft grade aluminum
• Fits stock or most aftermarket leaf springs
• Corrosion resistant gray anodized finish
• Lowers rear ride height 1”

This Part Fits:

Hotchkis Sport Suspension 17367 Heavy Duty Mopar Shackle Kit for Dodge Chrysler and Plymouth Leaf Spring Cars. These shackles are made from .250 in. steel and are finished in gloss black powder coat and includes 1 in. leaf spring bushings. What s really cool about these shackles is the design. The bolts are specially machined by Hotchkis as direct copies of the original shackle bolts consisting of a large machined shoulder that acts as the bushing sleeve and is machined down to lock the opposite shackle plate in position. Many other aftermarket shackles on the market use a bushing sleeve and a smaller bolt to achieve this which reduces strength. The kit includes grade 8 hardware nylock nuts polyurethane bushings grease and contains 1 in. leaf spring bushings which are commonly used on many Dodge Plymouth applications. Please ensure your car has 1 in. bushings. These are a perfect upgrade to your Hotchkis Leaf Springs for the B&E Body Cars. Fits 66-69 Dodge Charger 66-69 Dodge Coronet 66-69 Dodge Super Bee 66-69 Plymouth Roadrunner 66-69 Plymouth GTX 66-69 Plymouth Satellite 70-70 Plymouth Roadrunner 70-70 Plymouth GTX 70-70 Plymouth Satellite 70-70 Dodge Charger 70-70 Dodge Coronet 70-70 Dodge Super Bee 71-72 Dodge Charger 70-74 Plymouth Cuda and 70-74 Dodge Challenger.

• Includes Polyurethane Bushings

This Part Fits:

Upgrade your Jeep CJ's rear suspension with Fishbone Offroad Heavy Duty Shackles. Fits multiple models. Set of 2.

• 4" Center to Center on shackle bushing bolts
• 1981-1986 Jeep Scrambler CJ-8
• Durable Polyurethane Bushings
• Zinc plated 3/8" steel
• 1976-1983 Jeep CJ-5
• 1976-1986 Jeep CJ-7
• Set of (2)

Upgrade your Jeep CJ-5 with Fishbone Offroad Heavy Duty Shackles. Durable 3/8" steel construction. Set of 2 with polyurethane bushings. Adds 3/4" of lift.

• 4.5" Center to Center on shackle bushing bolts
• Can be used to replace front or rear shackles
• Durable Polyurethane Bushings
• Zinc plated 3,8" thick steel
• 4-1,2" center to center
• Provides 3,4" of lift
• 1946-1975 CJ-5
• Set of (2)

Enhance your Jeep Wrangler YJ with Fishbone Offroad Heavy Duty Shackles. Durable 3/8" steel construction. Set of 2 with polyurethane bushings.

• Can be used to replace front or rear shackles
• 4" Center to Center on shackle bushing bolts
• Durable Polyurethane Bushings
• Zinc plated 3,8" thick steel
• 1987-1995 Jeep Wrangler YJ
• With 1.25" spring bushing
• Set of (2)

One of the easiest ways to lift the rear suspension on a mini/mid size truck is using 2 in. lift shackles. Fabtechs stout 3/8 in. steel plateshackles are easily installed, providing the lift and performancedemanded by off roaders.

• Provides Lift/Performance Demanded By Off-Roaders
• 0.3750 in. Thick Steel Plate Shackles
• Easily Installed

This Part Fits:

Carli Drop Bracket & Carrier Bearing Drop designed for (2005-2023) Ford F-250 and F-350 Super Duty trucks

• Carli Drop Bracket & Carrier Bearing Drop designed for (2005-2023) Ford F-250 and F-350 Super Duty trucks
• Stackable shims for rear lift of 1"-4", allowing for customizable suspension adjustments
• Eliminates shudders and vibrations for a smoother driving experience

This Part Fits:

Belltech lowering Shackle kits, a simple, economical way to lower the rear of your truck 1, 2, or 3 inches to help give that leveled appearance. Belltech shackles are constructed from powder coated, heavy gauge die stamped P& O steel featuring OEM quality vulcanized rubber bushings to insure a perfect fit and superior quality for a long, quiet maintenance free life.

• Oem Style "silent block" bushing for long, quiet, maintenence free lifespan
• Oem Style "silent block" bushing for long, quiet, maintenance free lifespan
• Direct bolt-in w/ no additional modifications
• Easily lower or level the rear of your truck
• Stamped steel powder coated body
• Stamped steel powdercoated body
• 1" rear drop

This Part Fits: