Fits 2004-2007 Ford E-350, Excursion, F-250, and F-350 (6.0L Powerstroke).

The high-pressure oil system in the 6.0L Powerstroke is critical for injector operation. Over time, the O-rings sealing the oil rail ball tubes degrade, leading to high-pressure oil leaks, hard-start conditions, and eventual no-start failures. This Mishimoto High Pressure Oil Rail Ball Tube Set provides a targeted repair solution, allowing you to replace the failed components rather than the entire, costly oil rail assembly.

Each tube is manufactured from high-grade stainless steel for maximum corrosion resistance and durability. The kit includes heat-resistant Viton O-rings designed to withstand the extreme pressures and thermal cycles of the Powerstroke engine. To ensure a straightforward service, Mishimoto includes a specialized removal and installation tool to properly seat the new tubes without damaging the seals.

• Direct replacement for worn or leaking oil rail ball tubes and seals
• Constructed from high-grade stainless steel for long-term durability
• Viton O-rings provide superior resistance to high temperatures and oil degradation
• Includes specialized installation tool for precise fitment
• Kit includes: (8) Ball Tubes, (8) Viton Seals, (1) Removal/Installation Tool
• Mishimoto Lifetime Warranty
• MPN: MMOR-F2D-03

Fits 2007-2009 Dodge Ram 2500 and 3500.

Maintain optimal transmission fluid temperatures and tow with confidence using the Fleece Performance Transmission Cooler and Line Kit. Engineered to replace the restrictive factory setup, this kit provides a massive 2X increase in heat rejection over the stock cooler, ensuring your transmission remains protected under heavy loads. This comprehensive cooling solution includes heavy-duty transmission lines and high-quality AN fittings to eliminate common leak points.

Designed as a true drop-in replacement, the Fleece Performance cooler mounts to factory locations without the need for cutting or splicing original equipment lines. Every unit is 100% pressure and leak tested at the factory for maximum reliability.

• Manufacturer Part Number: FPE-TC-CUMM-0709
• 2X increase in heat rejection and cooling efficiency vs. stock cooler
• Heavy-duty transmission lines and AN fittings for a leak-free seal
• Drop-in replacement for factory transmission cooler mounting
• No cutting or splicing of OE lines required
• 100% pressure and leak tested

Fits 2003-2007 Dodge Ram 2500 and 3500 trucks (Laramie, SLT, Sport, ST, TRX4).

Protect your transmission and tow with confidence using the Fleece Performance Transmission Cooler and Line Kit (FPE-TC-CUMM-0307). This system is engineered as a direct drop-in replacement for the factory unit, providing a massive 2X increase in heat rejection compared to the stock cooler. By significantly lowering fluid temperatures, this kit helps prevent thermal breakdown and extends the service life of your transmission during heavy-duty use.

The kit features heavy-duty transmission lines equipped with high-quality AN fittings, ensuring a leak-free, high-flow connection that replaces the prone-to-leak factory lines. Every unit is 100% pressure and leak tested to guarantee reliability in the most demanding towing environments.

• Direct drop-in replacement for OE transmission cooler
• Provides 2X more heat rejection than the factory cooler
• Heavy-duty transmission lines with leak-free AN fittings
• No cutting or splicing of factory lines required
• 100% pressure and leak tested for durability
• Manufacturer Part Number: FPE-TC-CUMM-0307

The Turbosmart TS OPR V2 Billet Bracket is a precision-engineered mounting solution designed specifically for the Turbosmart OPR V2 Oil Pressure Regulator. CNC-machined for a perfect fit, this bracket provides a secure attachment point to the chassis or engine bay, ensuring your regulator remains stable even in high-vibration performance environments.

• CNC-machined from high-grade billet aluminum for superior strength
• Engineered for direct compatibility with Turbosmart OPR V2 regulators
• Low-profile design for versatile mounting in cramped engine bays
• Helps prevent stress and fatigue on oil lines by securing the regulator body
• Manufacturer Part Number: TS-0801-3002

Ensure reliable lubrication for your turbocharger with the Forced Performance Subaru FA20 Style Oil Supply Line. This component is engineered to provide a consistent and secure oil feed, preventing the pressure drops or leaks that can compromise turbocharger longevity on the FA20 platform.

• Manufacturer Part Number: 3055100
• Application: Specifically designed for Subaru FA20 engine configurations
• Purpose: Delivers critical oil supply from the engine block to the turbocharger
• Installation: FA20 style routing for a precise, vehicle-specific fit
• Durability: Constructed to withstand high-pressure oiling systems and engine bay heat cycles

The Forced Performance Subaru EJ Type Oil Supply Line (MPN 3055095) is engineered to provide a reliable, high-pressure oil feed to your turbocharger. On EJ-series engines, maintaining consistent oil flow is critical for preventing bearing failure and ensuring the longevity of both factory and performance aftermarket turbochargers.

This supply line is designed to replace restrictive or worn factory oil feeds with a robust solution capable of handling the high temperatures and vibrations found in the Subaru engine bay. Whether you are installing a new Forced Performance turbo or refreshing your current setup, this line ensures your turbocharger receives the lubrication it needs for optimal spool and service life.

• Specifically designed for Subaru EJ-series engine platforms
• Provides a secure, high-pressure oil path to the turbocharger
• Critical for maintaining turbocharger bearing health and performance
• Manufacturer Part Number: 3055095

The Vibrant Performance Oil Filter Spacer Assembly (MPN 17070) provides a reliable method for integrating oil temperature sensors, pressure sensors, or auxiliary oil lines into your lubrication system. This sandwich-style adapter installs between the oil filter and the engine block, eliminating the need to drill or tap factory components.

This comprehensive kit is engineered for universal application, featuring five interchangeable adapter bolts to accommodate the most common oil filter thread pitches. The spacer includes two 1/8" NPT female ports and comes equipped with port plugs for configurations where only one port is required.

• Two (2) 1/8" NPT female ports for sensors or auxiliary feeds
• Includes five (5) adapter bolts: M18 x 1.5, M20 x 1.5, M22 x 1.5, 3/4"-16, and 13/16"-16
• Constructed for leak-free performance with included O-ring seals
• Secure installation via the provided tab lock washer
• Manufacturer Part Number: 17070

The Vibrant Performance 17065 Thermostatic Oil Cooler Sandwich Adapter provides an efficient solution for managing engine oil temperatures. By utilizing an internal thermostat, this adapter prevents oil flow to the external cooler until the engine reaches operating temperature, ensuring faster warm-ups and consistent thermal management during high-performance driving.

This universal adapter is machined from high-grade aluminum and features -10 ORB (O-Ring Boss) inlet and outlet ports for a reliable, leak-free seal. To simplify installation across various vehicle platforms, the kit includes five distinct oil filter adapter bolts and a pair of -10 AN male flare fittings. This comprehensive hardware set allows for a secure interface between the engine block and the oil filter while facilitating easy plumbing to your oil cooling system.

• Manufacturer Part Number: 17065
• Ports: Dual -10 ORB inlet/outlet
• Included Fittings: Two (2) -10 AN Male Flare adapters
• Included Filter Bolts: M18 x 1.5, M20 x 1.5, M22 x 1.5, 3/4"-16, and 13/16"-16
• Internal thermostat for precise oil temperature regulation

The Vibrant Performance Thermostatic Oil Cooler Sandwich Adapter (MPN 17060) provides a reliable solution for managing engine oil temperatures in high-performance applications. By installing directly between the engine block and the oil filter, this adapter allows you to route oil through an external cooling loop while retaining your factory oil filter location. The integrated thermostat ensures that oil flows through the cooler only when necessary, preventing over-cooling during street driving and allowing the engine to reach operating temperature faster.

This universal kit includes a selection of five adapter bolts to accommodate various thread pitches, along with a spacer to provide necessary clearance for different filter housings and engine block designs. The assembly is finished with -10 AN male flare adapters for secure, high-flow connections to your oil lines.

• Maintains stable engine oil temperatures by bypassing oil through a cooling loop
• Includes spacer for added clearance during installation
• Includes five oil filter adapter bolts: M18 x 1.5, M20 x 1.5, M22 x 1.5, 3/4"-16, and 13/16"-16
• Features a pair of -10 AN inlet/outlet male flare adapters
• Complete with durable O-ring seals for a leak-free fit
• Manufacturer Part Number: 17060

Ensure reliable oil return from your top-mounted turbocharger with the Vibrant Performance Universal Oil Drain Kit (10283). This complete plumbing solution is designed to handle the high temperatures and pressures of performance turbocharging, providing a durable path from the turbocharger outlet back to the oil pan using high-flow -10 AN components.

The kit features a 20-inch stainless steel braided hose with a PTFE (Teflon) liner, offering superior chemical and heat resistance compared to standard rubber lines. To ensure compatibility with various oil pan materials, Vibrant includes both steel and aluminum -10 AN weld bungs. Every component, from the precision-machined aluminum drain flange to the -10 AN hose end fittings, is engineered for a leak-free seal and straightforward installation.

• Manufacturer Part Number: 10283
• Hose Specifications: 20" Teflon-lined stainless steel braided hose (-10 AN)
• Fittings Included: (2) -10 AN Aluminum hose end fittings and (1) -10 AN adapter fitting
• Weld Bungs: (1) Steel and (1) Aluminum -10 AN weld bung for universal pan compatibility
• Drain Flange: Machined aluminum oil drain flange
• Configuration: Designed specifically for top-mount turbocharger setups

The Vibrant Performance 10282 Universal Oil Drain Kit provides a complete, high-quality plumbing solution for turbocharger oil returns, specifically configured for top-mount turbo setups. This kit utilizes -10 AN sizing to ensure unrestricted oil flow back to the crankcase, preventing pressure backup that can lead to turbo seal failure.

Built for durability in high-heat environments, the kit features a 20-inch stainless steel flexible hose with a Teflon (PTFE) lining, offering superior resistance to oil degradation and thermal stress compared to standard rubber lines. The included weld bungs provide versatility for different oil pan materials, while the aluminum drain flange ensures a secure, leak-free connection at the turbocharger.

• Part Number: 10282
• Hose Type: -10 AN Stainless Steel Flexible Hose (PTFE Lined)
• Hose Length: 20 inches
• Drain Flange: Aluminum Top Mount Oil Drain Flange
• Fittings: (2) -10 AN Aluminum Hose End Fittings, (1) -10 AN Aluminum Adapter Fitting
• Weld Bungs: (1) Steel and (1) Aluminum -10 AN Oil Pan Weld Bung included

The Vibrant Performance 10281 Universal Oil Drain Kit is a comprehensive plumbing solution designed for turbocharger oil return systems. This kit features a 12-inch Teflon-lined stainless steel braided hose, engineered to withstand high temperatures and resist degradation in demanding engine bay environments. The -10 AN sizing ensures sufficient flow for oil drainage from the turbocharger back to the oil pan.

Vibrant provides maximum installation flexibility by including both steel and aluminum oil pan weld bungs, allowing for compatibility with various pan materials. The precision-machined aluminum fittings and drain flange provide secure, leak-free connections essential for forced induction applications.

• 12-inch -10 AN Stainless Steel Flexible Hose (Teflon-lined)
• (2) -10 AN Aluminum Hose End Fittings
• (1) -10 AN Aluminum Adapter Fitting
• -10 AN Steel Oil Pan Weld Bung
• -10 AN Aluminum Oil Pan Weld Bung
• Aluminum Oil Drain Flange
• Manufacturer Part Number: 10281

This Vibrant Performance Universal Oil Drain Kit provides the essential components for a reliable turbocharger oil return system. Designed for high-performance applications, this kit utilizes -10 AN hardware to ensure efficient, unrestricted oil flow back to the pan, helping to prevent the backpressure that causes turbo seal failure.

• Includes one 12-inch -10 AN stainless steel flexible hose with a high-temperature Teflon lining
• Includes two -10 AN aluminum hose end fittings and one -10 AN aluminum adapter fitting
• Supplied with both a steel and an aluminum -10 AN oil pan weld bung to accommodate different oil pan materials
• Includes a precision-machined aluminum oil drain flange for secure mounting
• Universal fitment for custom turbocharger setups
• Manufacturer Part Number: 10280

The Vibrant Performance Universal Pre-Assembled Hose Assembly (MPN 10277) provides a professional-grade plumbing solution for oil feed, fuel, nitrous, and coolant systems. This 4ft assembly features a PTFE (Teflon) lining, offering superior chemical resistance and thermal stability compared to standard rubber lines.

Constructed with a durable stainless steel outer braid for abrasion protection, this hose comes pre-assembled with two -4AN female fittings. Each fitting is secured using a hydraulic crimping tool to ensure a leak-free connection, and the entire assembly is pressure tested to its rated working pressure for maximum reliability.

• Part Type: Pre-Assembled Hose Kit
• Hose Size: -4AN
• Length: 4 Feet (48 inches)
• Internal Lining: PTFE (Teflon)
• Outer Reinforcement: Stainless Steel Braid
• Fitting Material: Black Anodized Aluminum
• Connection Type: Two (2) -4AN Female Fittings
• Manufacturer Part Number: 10277

Please note: These assemblies are not intended for use in high-pressure hydraulic applications, such as power steering or braking systems.

This Vibrant Performance Pre-Assembled Hose Assembly (MPN: 10276) provides a professional-grade plumbing solution for oil feed, fuel, nitrous, and coolant systems. Measuring 3 feet in length, this hose features a durable PTFE (Teflon) lining encased in a stainless steel braid, offering superior resistance to chemical degradation and thermal expansion.

Each assembly is factory-crimped using specialized hydraulic tooling to ensure a permanent, leak-free seal between the black anodized aluminum fittings and the hose. To guarantee reliability out of the box, every hose assembly is pressure tested to its rated working pressure before shipment.

• Length: 3 Feet
• Fitting Size: -4AN Female (Dual)
• Hose Material: PTFE (Teflon) lined with Stainless Steel braiding
• Fitting Material: Black Anodized Aluminum
• Assembly: Professionally hydraulic-crimped
• Applications: Fuel, oil, nitrous, and coolant
• MPN: 10276

Note: These hose assemblies are not intended for use in high-pressure hydraulic applications.

The Vibrant Performance 10275 pre-assembled hose assembly is engineered for reliable fluid transfer in demanding environments. This 2-foot line features a PTFE (Teflon) inner liner, providing superior chemical resistance for applications involving fuel, oil, nitrous, and coolant. The outer stainless steel braid offers high durability and protection against abrasion.

To ensure a leak-free connection, these lines are professionally assembled using a hydraulic crimping tool. Each hose is pressure tested to its rated working pressure, providing peace of mind for critical plumbing tasks. The assembly is finished with black anodized aluminum -4AN female hose ends for a clean, professional look and easy installation.

• Manufacturer Part Number: 10275
• Length: 2 Feet
• Hose Size: -4AN
• Fitting Type: Dual -4AN Female (Pre-Assembled)
• Liner Material: PTFE (Teflon)
• Outer Braid: Stainless Steel
• Fitting Material: Black Anodized Aluminum
• Installation: Hydraulically crimped and pressure tested

Note: This hose assembly is not intended for use in high-pressure hydraulic applications.

The Vibrant Performance 10272 is a professionally pre-assembled 4ft hose kit designed for reliable fluid delivery across oil, fuel, nitrous, and coolant systems. This universal assembly features a PTFE (Teflon) lined core, which provides superior chemical resistance and prevents vapor permeation, protected by a durable stainless steel (SS) braided outer jacket for high-pressure durability and abrasion resistance.

• Manufacturer Part Number: 10272
• Length: 4ft (48 inches)
• Fitting Size: -3AN Female (Dual)
• Liner Material: PTFE (Teflon)
• Outer Wrap: Stainless Steel Braid
• Fitting Material: Black Anodized Aluminum
• Construction: Hydraulically crimped fittings

To ensure maximum reliability, every hose is factory pressure-tested to its rated working pressure using hydraulic crimping tools for a permanent, leak-free seal. These assemblies are ideal for turbocharger oil feed lines and generic fluid plumbing. Note: Not intended for use in high-pressure hydraulic steering or braking applications.

This Vibrant Performance universal oil feed kit provides a professional-grade plumbing solution for oil, fuel, nitrous, or coolant systems. This pre-assembled 3ft hose (MPN 10271) features a PTFE (Teflon) liner wrapped in a durable stainless steel braid, offering superior chemical resistance and thermal stability compared to standard rubber lines.

Each assembly is factory-crimped using specialized hydraulic tooling to ensure a leak-free connection. To guarantee performance under load, every hose is pressure tested to its rated working pressure before leaving the facility. The kit is finished with black anodized aluminum -3AN female hose ends for a clean, corrosion-resistant installation.

• Length: 3 Feet
• Fitting Size: -3AN Female (both ends)
• Hose Material: PTFE-lined with Stainless Steel outer braid
• Fitting Material: Black Anodized Aluminum
• Construction: Professionally hydraulic-crimped and pressure tested
• Compatibility: Suitable for oil, fuel, nitrous, and coolant
• Restriction: Not for use in high-pressure hydraulic applications

Vibrant Performance pre-assembled hose assemblies provide a reliable, professional-grade solution for plumbing critical fluid systems. This 2ft universal hose features a PTFE (Teflon) inner liner, which offers superior chemical resistance and thermal stability compared to standard rubber. Encased in a durable stainless steel outer braid, this line is engineered to handle fuel, oil, nitrous, and coolant without degradation or vapor permeation.

• Length: 2ft
• Fitting Size: -3AN Female (both ends)
• Construction: PTFE-lined with stainless steel outer braid
• Fittings: Black anodized aluminum crimp-on ends
• Installation: Hydraulically crimped for a leak-free seal
• Testing: Pressure tested to rated working pressure
• Manufacturer Part Number: 10270

These assemblies are ideal for turbocharger oil feed lines and other low-to-medium pressure automotive fluid transfers. Please note: these hose assemblies are not intended for high-pressure hydraulic steering or braking applications.

Protect your turbocharger from seal failure and excessive oil consumption with the Turbosmart ProOPR Rising Rate Turbo Oil Pressure Regulator. While many performance engines utilize high-volume oil pumps that can overwhelm turbo seals, the ProOPR (TS-0811-1212) ensures your turbo receives precise, regulated pressure regardless of engine oil pressure fluctuations.

• Rising Rate Control: Features a boost-reference port to increase oil pressure in proportion to manifold pressure, maintaining the critical pressure differential across the bearings.
• Twin Outlet Design: Equipped with dual outlets to simplify plumbing for twin-turbo setups or to provide a clean routing solution for single-turbo applications.
• Reliable Performance: Prevents the common issue of oil smoke and seal bypass caused by high base oil pressure, providing a safer alternative to simple restrictor orifices.
• Technical Specs: Stainless steel internal components for longevity and precise regulation under high-heat conditions.
• Manufacturer Part Number: TS-0811-1212

The Turbosmart OPR V2 is a dedicated oil pressure regulator designed to provide a constant 40 PSI oil feed to your turbocharger, regardless of engine oil pressure. This precision-engineered component is essential for preventing oil leaks and blue smoke caused by high pressure, particularly in ball-bearing turbochargers that are sensitive to oil flow.

Manufactured from billet aluminum with a durable anodized finish, the OPR V2 includes a built-in 44-micron stainless steel oil filter and a 1/8 NPT port for pressure monitoring. This ensures your turbo receives clean oil at the correct pressure for optimal bearing longevity and performance.

• Manufacturer Part Number: TS-0811-0012
• Regulated Output: Constant 40 PSI
• Inlet/Outlet: -4AN fittings
• Integrated Filter: Replaceable 44-micron stainless steel element
• Sensor Port: 1/8 NPT for gauge or pressure sensor
• Material: CNC-machined billet aluminum

The Turbosmart OPR T40 Fitting Kit provides a precise plumbing solution for managing turbocharger oil supply. This kit is designed to adapt the Turbosmart Oil Pressure Regulator (OPR) to standard oil feed lines, converting the regulator's internal -4 ORB (O-Ring Boss) port to a -4AN male flare. The clear anodized finish ensures long-term corrosion resistance in high-heat engine bay environments.

• Precision Fitment: Engineered specifically for the Turbosmart OPR T40 oil pressure regulator series.
• Component Specs: Includes a clear anodized -4 ORB Male to -4AN Male adapter for a leak-free seal.
• Durable Construction: CNC machined to tight tolerances to withstand high-pressure oiling systems.
• MPN: TS-0802-1001
• Installation Note: This kit includes the adapter fitting only; hoses and the OPR unit must be purchased separately.

The Turbosmart ProOPR Rising Rate Turbo Oil Pressure Regulator provides precision control over the oil supply to your turbocharger. Unlike standard fixed-pressure regulators, the ProOPR (TS-0801-1012) features a rising rate function that increases oil pressure in proportion to boost pressure. This ensures your turbocharger receives maximum lubrication under high-load conditions while protecting delicate oil seals from over-pressurization and leaking at idle or low engine speeds.

• Prevents oil smoke and seal failure caused by excessive oil pressure
• Rising rate design scales oil delivery with manifold pressure
• Manufactured from billet aluminum with stainless steel internal components
• Equipped with -4AN inlet and outlet ports
• Includes 1/8 NPT port for pressure sensor or gauge monitoring
• Suitable for all turbocharger types, including ball-bearing and journal-bearing units
• Manufacturer Part Number: TS-0801-1012

The Mishimoto Oil Line Stay (MMSBH-SEP-10BK) provides a secure and professional solution for organizing engine bay plumbing. Designed to fit both rubber and stainless steel braided -10AN lines, this stay prevents line-to-line and line-to-chassis abrasion, a common failure point in high-performance oil cooler setups or custom plumbing applications.

Constructed from high-grade 6061 aluminum, the stay features a robust two-piece design. This allows for simple installation over existing lines without the need for disassembly. The separator ensures proper line spacing and protects against vibrational wear while maintaining a clean, technical aesthetic in the engine compartment.

• Fits all standard rubber and stainless steel -10AN braided lines
• CNC-machined from 6061 aluminum for long-term durability
• Two-piece clamp design for easy installation and secure fitment
• Prevents line rubbing and surface degradation
• Anodized black finish for corrosion resistance
• Includes Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMSBH-SEP-10BK

Fits 2004-2008 Mazda RX-8 manual transmission models equipped with dual factory oil coolers.

The Mazda RX-8's high-revving rotary engine demands consistent lubrication and cooling, but the factory rubber oil lines and steel fittings are prone to severe corrosion and degradation over time. This Mishimoto oil line kit provides a durable, leak-resistant solution by replacing the entire factory assembly—including the vulnerable line near the front left suspension and the intermediate line spanning both oil coolers.

Constructed with premium braided stainless steel and high-grade aluminum fittings, these lines are designed to withstand the high temperatures and pressures of a 9,000 RPM rotary. The kit installs without permanent modifications or cutting and features prelabeled lines for straightforward identification. This comprehensive upgrade ensures your lubrication system remains intact during daily driving and track use.

• Replaces corrosion-prone OE rubber lines and steel fittings
• Direct fit for manual transmission models with dual oil coolers
• Four premade braided stainless steel oil lines with aluminum fittings
• Includes M18 banjo bolts, oil seals, and a male-to-male -10AN connector
• Prelabeled lines simplify the installation process
• Protected by the Mishimoto Lifetime Warranty
• Manufacturer Part Number: MMSBH-RX8-04K

Fits 2004-2008 Mazda RX-8 models across all trims including Base, Shinka, Sport, Touring, Grand Touring, and 40th Anniversary Edition.

The high-revving rotary engine in the Mazda RX-8 generates significant heat, relying on dual oil coolers to maintain safe operating temperatures during spirited driving. Over time, the factory rubber lines and steel fittings—specifically the primary line located on the left-hand side near the front suspension—are prone to severe corrosion and degradation from road salt and debris. The Mishimoto Primary Replacement Oil Line provides a durable, corrosion-resistant solution to prevent oil leaks and protect your engine.

This direct-fit replacement features a premade braided stainless steel line paired with aluminum M18 to -10AN banjo fittings. Unlike the OE components, these materials are engineered to resist high-pressure fatigue and environmental wear. The kit is designed for a straightforward bolt-on installation with no cutting or permanent vehicle modifications required.

• Direct-fit replacement for the primary oil line on 2004-2008 Mazda RX-8 models
• Replaces the corrosion-prone factory rubber line and steel fittings
• Durable braided stainless steel construction with aluminum M18 - 10AN banjo fittings
• Includes M18 banjo bolts and oil seals for a complete, leak-free installation
• Manufacturer Part Number: MMSBH-RX8-04
• Includes Mishimoto Lifetime Warranty

The Mishimoto Nylon Braided Oil Hose Kit fits select 2015-2020 BMW M2 Competition, M3, and M4 (Base, CS, and GTS) models equipped with the S55 engine. This kit is engineered to replace the factory hardlines routing from the oil pump to the cooler, which are prone to corrosion and abrasion over time. By replacing rigid lines with flexible, robust nylon braided hoses, you eliminate potential leak points that can lead to improper lubrication of your high-performance engine.

This application-specific kit includes -10AN fittings and high-quality blue anodized aluminum adapters. The first pair of adapters converts the factory oil pump housing for -10AN use, while the second pair allows the lines to attach securely to either the stock oil cooler or the Mishimoto bar-and-plate upgrade. Finished in stealthy black to maintain an OEM+ engine bay aesthetic, this kit provides a durable, professional-grade solution for the F8X cooling system.

• Direct fit for 2015-2020 BMW F8X M2/M3/M4
• Nylon braided oil lines with pre-installed -10AN fittings
• Includes blue anodized aluminum adapters for the oil pump housing
• Compatible with both OEM and Mishimoto oil coolers
• Stealth black finish for a clean, factory look
• Manufacturer Part Number: MMSBH-F80-15
• Includes Mishimoto Lifetime Warranty

The Mishimoto MMSBH-10-5 is a high-performance fluid transfer solution designed for fuel, oil, vacuum, and water applications. This 5-foot hose features a durable stainless steel braided exterior that resists abrasion and corrosion while maintaining the flexibility needed for clean routing in performance engine bays. Built to withstand extreme conditions, it is rated for temperatures ranging from -40°F to +300°F and supports a maximum pressure of 750 PSI.

To ensure a secure, leak-free connection and simplified installation, this hose comes pre-assembled with two -10AN swivel fittings: one straight and one 90-degree. Whether you are plumbing an oil cooler or upgrading fuel lines, this hose provides the reliability required for both track and street use.

• Length: 5 Feet
• Hose Size: -10AN
• Fittings: (1) Straight Swivel and (1) 90-Degree Swivel -10AN
• Material: Stainless steel braided construction
• Temperature Range: -40°F to +300°F
• Maximum Pressure: 750 PSI
• Applications: Fuel, oil, vacuum, and water
• Manufacturer Part Number: MMSBH-10-5
• Mishimoto Lifetime Warranty

This Mishimoto Stainless Steel Braided Hose provides a durable, flexible solution for high-performance fluid transfer. Measuring 4 feet in length, it is engineered to meet the demands of performance engine bays, serving as a reliable component for oil cooling, fuel, vacuum, or water line systems. The stainless steel outer braid ensures superior resistance to both corrosion and abrasion while maintaining the flexibility needed for tight routing.

For a streamlined installation, each hose comes pre-assembled with one straight swivel -10AN fitting and one 90-degree swivel -10AN fitting. Designed to withstand extreme conditions, this hose maintains structural integrity across a wide temperature spectrum and high-pressure environments, backed by the Mishimoto Lifetime Warranty.

• Length: 4 Feet
• Fitting Size: -10AN
• Fittings: (1) Straight Swivel and (1) 90-Degree Swivel
• Operating Temperature: -40°F to +300°F
• Maximum Pressure: 750 PSI
• Applications: Fuel, Oil, Vacuum, and Water
• Construction: Stainless Steel Braided
• Manufacturer Part Number: MMSBH-10-4

The Mishimoto Stainless Steel Braided Hose (MMSBH-10-3) is a versatile plumbing solution engineered for high-performance cooling and fluid transfer. Designed to integrate seamlessly into oil cooling systems, this 3-foot hose is also suitable for fuel, vacuum, and water line applications. The stainless steel outer braid provides critical protection against abrasion and corrosion while maintaining flexibility in tight engine bays.

This hose comes pre-assembled to reduce installation time and potential leak points. It features one straight -10AN swivel fitting and one 90-degree -10AN swivel fitting, allowing for clean routing around components. With a maximum pressure rating of 750 PSI and a broad thermal operating range, it is built to withstand the rigors of track use and high-heat environments.

• Length: 3 Feet
• Size: -10AN
• Fittings: (1) Straight Swivel and (1) 90-Degree Swivel -10AN
• Operating Temperature: -40°F to +300°F
• Maximum Pressure: 750 PSI
• Applications: Oil, Fuel, Water, and Vacuum
• Material: Stainless Steel Braided Outer
• Manufacturer Part Number: MMSBH-10-3
• Mishimoto Lifetime Warranty