The Truxedo Elevate FS Base Rack (MPN 1119034) is an ultra-low-profile rack system designed to maximize your truck's hauling utility without sacrificing bed cover functionality. Engineered for maximum versatility, this rack integrates seamlessly with T-slot equipped truck caps and bed covers, including most inside-mount soft roll-up models. It provides a secure, overhead mounting point for gear while keeping the bed area clear for other cargo.

Constructed from robust, powder-coated aluminum, the Elevate FS Base Rack is built for long-term durability and corrosion resistance. The system features highly adjustable uprights that allow you to configure the rack to your specific load requirements. For added security, the rack includes innovative theft-resistant locking mounts. Installation is efficient and non-invasive, typically mounting to existing T-slot rails in under an hour.

• Low-Profile Design: Maintains a sleek appearance and provides better clearance for garages and low-hanging obstacles.
• Aluminum Construction: Lightweight yet durable build with a protective powder coat finish.
• T-Slot Compatibility: Works with RealTruck-branded T-slot rails and many inside-mount soft roll-up covers.
• Theft Protection: Features locking rack mounts to secure your hardware to the vehicle.
• Simple Installation: Attaches to T-slot rails in less than 60 minutes with standard tools.
• Configurable Uprights: Easily adjustable to accommodate different cargo types and sizes.

Maximize your truck's utility with the Truxedo Elevate CS Base Rack. This ultra-low-profile rack system is specifically engineered to integrate with T-slot equipped truck bed covers and caps, as well as most inside-mount soft roll-up covers. It provides a robust, overhead cargo solution that maintains the functionality of your bed cover while expanding your carrying capacity.

Constructed from high-strength aluminum with a durable powder coat finish, the Elevate CS Base Rack is built for long-term outdoor exposure. The system features adjustable uprights for a highly configurable setup and includes theft-resistant locking mounts to secure your hardware. Installation is straightforward, utilizing existing T-slot rails for a bolt-on fit that typically takes less than an hour.

• Heavy-duty aluminum construction with a corrosion-resistant powder coat finish
• Ultra-low-profile design for improved aerodynamics and clearance
• Compatible with T-slot rail systems and most inside-mount soft roll-up bed covers
• Easily adjustable and configurable upright positions
• Integrated theft-resistant locking rack mounts
• Manufacturer Part Number: 1119035

The RealTruck Elevate Tie Down Kit adds four adjustable, heavy-duty anchor points to your truck bed, designed specifically for seamless integration with the Elevate Rack System and other T-slot equipped rails. These anchors provide the versatility needed to secure oddly shaped cargo or gear that requires specific tension angles for safe transport.

Each tie-down is engineered to slide smoothly within the T-slot channel, allowing for quick repositioning along the length of the rail. Once positioned, they lock securely to provide a stable mounting point for bungee cords, ratchet straps, or rope. This kit is an essential upgrade for any utility or overlanding setup requiring modular cargo management.

• Designed for the Elevate Rack System and compatible T-slot mounting rails
• Fully adjustable sliding design for custom load positioning
• Heavy-duty construction for reliable cargo retention
• Simple installation with no drilling required
• Includes four (4) tie-down anchors and necessary hardware
• Manufacturer Part Number: 1119132

The Truxedo Elevate 41in Standard Side Bar expands the utility of your truck's cargo management system, providing a robust mounting point for specialized gear. Engineered to integrate seamlessly with the Elevate Rack System, these bars allow for a highly customizable setup that adapts to your hauling needs, from cargo baskets to bike and kayak carriers.

Constructed from high-quality extruded aluminum, these side bars provide exceptional structural stability and increased load capacity without adding unnecessary weight. The integrated T-slot channels positioned on both sides of the bar allow for the easy addition of variety of gear mounts and cargo management accessories, ensuring your equipment stays secure during transit.

• Integrated T-slot channels on both sides for versatile accessory mounting.
• High-quality extruded aluminum construction for enhanced structural integrity.
• Direct bolt-on installation for straightforward setup.
• Engineered specifically for the Elevate Rack System.
• Made in the USA.

• Manufacturer Part Number: 1118729
• Length: 41 Inches
• Material: Extruded Aluminum
• Finish: Durable Black Powder Coat
• Warranty: Limited Lifetime Warranty

Fits select 1980-2026 Chevrolet and Ford vehicles.

The TruXedo Elevate FS Rack is an engineered cargo solution designed to maximize the storage capacity of your pickup truck. Featuring telescoping legs, this rack offers an adjustable height range from 18 to 28 inches, allowing you to set the optimal clearance for ladders, kayaks, or rooftop tents while maintaining a low profile when needed. The system is built to bridge the gap between utility and bed protection, allowing for the full use of most inside-mount truck bed covers when paired with Elevate TS Rails.

Constructed from heavy-duty aluminum with a durable textured powder-coat finish, the Elevate FS Rack is built to withstand harsh environments and heavy use. The crossbars feature integrated T-slot channels, making it easy to install various tie-downs, mounts, and cargo accessories. Whether you are heading to the job site or the campsite, this rack provides the robust support required for your gear.

• Adjustable Height: 18 in. to 28 in. for maximum versatility
• Load Rating: 500 lbs (on-road)
• Finish: Durable textured black powder-coat
• T-Slot Compatibility: Integrated channels for accessory mounting
• Versatile Fitment: Compatible with most inside-mount truck bed covers
• Installation: Can be installed, adjusted, or removed in minutes
• Origin: Made in the USA
• Warranty: Limited Lifetime Warranty
• Manufacturer Part Number: 1118570

Fits select 1983-2026 Chevrolet Colorado, GMC Canyon, Ford Maverick, Ford Ranger, and Mazda B-Series pickups. The TruXedo Elevate CS Rack is a versatile cargo solution designed specifically for trucks with narrower bed profiles, providing an adjustable height range of 18 to 28 inches to clear the cab or accommodate specific gear loads.

Engineered for maximum utility, this rack system features integrated T-slot channels that accept a wide range of tie-downs, mounts, and accessories for hauling bikes, kayaks, baskets, or rooftop tents. Its unique design is compatible with most inside-mount truck bed covers; if your cover has integrated T-slots, the rack slides directly into the rails. For covers without channels, the system can be paired with Elevate TS Rails (sold separately). Constructed with a durable textured powder-coat finish, this rack is built to withstand heavy use in diverse environments.

• Adjustable height from 18 to 28 inches for maximum cargo versatility
• Static load rating of 500 lbs (on-road)
• Integrated T-slot channels for easy accessory mounting
• Compatible with most inside-mount rolling or folding truck bed covers
• Durable, textured black powder-coat finish for corrosion resistance
• Made in the USA
• Manufacturer Part Number: 1118513
• Includes a Limited Lifetime Warranty

The TruXedo Elevate TS Rails (MPN: 1118414) provide a versatile mounting foundation for your truck bed, fitting select 2019-2024 Ford Maverick, Jeep Gladiator, and Ram 1500 pickups. Designed to bridge the gap between truck bed covers and overhead racks, these 50-inch rails feature integrated T-slot channels that accept a wide variety of cargo accessories, tie-downs, and baskets.

Constructed from robust aluminum with a durable textured powder-coat finish, these rails are engineered to withstand heavy use while maintaining a sleek, low-profile appearance. The no-drill installation process allows you to set up your cargo system in minutes. These rails are specifically designed to work seamlessly with Elevate Fixed or Telescoping Racks and are compatible with most roll-up and folding truck bed covers, ensuring you do not have to sacrifice bed security for overhead utility.

• Integrated T-Slot channels for mounting racks and cargo accessories
• No-drill installation using existing factory mounting points
• Robust aluminum construction for maximum durability
• Durable textured powder-coat finish resists corrosion
• Compatible with most roll-up and folding truck bed covers
• Limited Lifetime Warranty
• Made in the USA
• Manufacturer Part Number: 1118414

Fits select 1980-2024 Chevrolet, Ford, GMC, Mazda, and Nissan trucks.

The Truxedo Elevate TS Rails (Part #1118359) provide a robust mounting platform for truck owners looking to increase their cargo utility. These 72-inch rails feature integrated T-slot channels, allowing you to install a wide range of racks, tie-downs, and baskets while maintaining access to your truck bed or compatible tonneau cover. Constructed from heavy-duty aluminum with a textured black powder-coat finish, these rails are built to withstand heavy use and harsh weather conditions.

Installation is straightforward and requires no drilling or specialized tools, bolting directly to the truck bed in minutes. The system is designed to provide the versatility needed for hauling kayaks, bikes, or extra gear without sacrificing the protection of a bed cover.

• Integrated T-Slot channels for mounting crossbars and cargo accessories
• Robust aluminum construction with a durable, textured powder-coat finish
• No-drill installation for a quick, clean setup
• Compatible with a variety of T-slot rack systems and tie-downs
• Made in the USA
• Manufacturer Part Number: 1118359
• Limited Lifetime Warranty

Fits select 2002-2024 Chevrolet, Dodge, Ford, GMC, Isuzu, Lincoln, Nissan, Ram, and Toyota pickup trucks. These 63-inch Truxedo Elevate TS Rails provide the essential foundation for your cargo management system, enabling the installation of Elevate Fixed or Telescoping Racks while maintaining full tonneau cover functionality.

Constructed from robust, aircraft-grade aluminum with a textured powder-coat finish, these rails are engineered for durability in harsh environments. The integrated T-slot channels allow for the seamless mounting of a wide variety of cargo accessories, including tie-downs, baskets, and bike racks. Designed for a simple, no-drill installation, these rails bolt directly to the truck bed to provide a secure mounting point that works in conjunction with most inside-mount roll-up or folding truck bed covers.

• Part Number: 1118358
• Length: 63 inches
• Material: Robust aluminum construction
• Finish: Durable, textured powder-coat
• Integrated T-Slot channels for cargo accessory compatibility
• Simple, no-drill installation process
• Compatible with most roll-up and folding tonneau covers
• Made in the USA
• Limited Lifetime Warranty

Fits select 2004-2024 Chevrolet Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Ram 1500, Isuzu i-Series, and Suzuki Equator.

The Truxedo Elevate TS Rails provide the essential foundation for your truck’s cargo management system. Designed to integrate seamlessly with both the Elevate Fixed and Telescoping Rack systems, these 56-inch rails add a versatile T-slot mounting point to your truck bed. This unique design allows for the installation of racks and accessories while maintaining full functionality of most roll-up or folding truck bed covers.

Constructed from robust aluminum with a durable, textured powder-coat finish, these rails are built to withstand heavy use in any environment. The integrated T-slot channels accept a wide variety of cargo accessories, including tie-downs, baskets, and bike racks. Installation is straightforward and requires no drilling or specialized tools, bolting directly to the vehicle's stake pockets or bed rails for a secure fit.

• Length: 56 inches
• Integrated T-slot channels for accessory mounting
• Heavy-duty aluminum construction
• Textured black powder-coat finish for corrosion resistance
• Compatible with most roll-up and folding tonneau covers
• No-drill installation for most applications
• Limited Lifetime Warranty
• Made in the USA
• Manufacturer Part Number: 1118329

The Go Rhino XRS Accessory Gear Table (MPN 5950110T) expands the utility of your mid-size truck’s overland setup. This aluminum gear plate integrates seamlessly with the Go Rhino 4-CORE system, providing a dedicated mounting surface for trail essentials like fuel cans, recovery boards, and MOLLE pouches, while flipping down to serve as a sturdy trail table for camp prep or equipment staging.

Specifically designed to bolt onto the 10-inch spaced 4-CORE crossbars of the SRM Series, CEROS, or XRS Xtreme Racks, this panel is also drillable for custom mounting on flat surfaces. The textured black powder coat finish provides superior corrosion resistance, while the 200-pound maximum capacity is supported by dual high-strength safety cables for heavy-duty use.

• Dual-Function Design: Serves as an external gear mounting surface when closed and a flat trail table when flipped down.
• High Load Capacity: 200-pound max capacity secured by high-strength dual safety cables.
• Universal Gear Compatibility: Compatible with Daystar, Cam Cans, RotoPax, MaxTrax, Jerry Cans, and MOLLE/PALS systems.
• Security Features: Integrated safety catch keeps the table secure during transit, with an option to add a padlock for theft prevention.
• Premium Construction: Lightweight aluminum table surface with a durable textured black powder coat finish.

Technical Specifications:

• Part Number: 5950110T
• Mounting Pattern: 10-inch 4-CORE spacing
• Material: Aluminum
• Weight Capacity: 200 lbs
• Finish: Textured Black Powder Coat
• Warranty: Limited Lifetime on materials/construction; 5-year finish

Designed for select Go Rhino XRS Overland Mid-Size and Full-Size Racks, the XRS Reel Handle Kit provides a heavy-duty, multi-functional upgrade for your overland recovery setup.

The Go Rhino XRS Reel Handle Kit (5950100T) features a pair of tubular steel grab handles that provide a secure grip point for accessing roof-mounted gear or maneuvering around your vehicle. Beyond acting as a handle, the design serves as an integrated storage reel for tow ropes and recovery straps, keeping vital equipment organized and off the floor. While engineered to bolt directly to the front or rear of the XRS Xtreme Rack, the flat-surface mounting plates offer the versatility to be used in marine or forestry applications.

• Direct fit for Go Rhino XRS Overland Mid-Size and Full-Size Racks
• Dual-purpose design: high-strength grab handle and tow rope storage reel
• Heavy-duty tubular steel construction for maximum durability
• Textured Black powder coat finish for superior corrosion resistance
• Flexible mounting options on either side of the XRS Rack system
• Ships as a complete pair with necessary hardware

Go Rhino provides a limited lifetime warranty on materials and construction, with a 5-year warranty on the Textured Black finish.

Fits 2020-2025 Jeep Gladiator models including Sport, Sport S, Rubicon, Mojave, and Overland (V6-3.0L Diesel / V6-3.6L).

The Go Rhino XRS Overland Xtreme Bed Rack is a modular cargo management system designed to maximize the utility of your Jeep Gladiator's bed. This product (MPN 5950000T-02) is Box 2 of 2 for the complete system and must be used in conjunction with Box 1 (MPN 5950000T-01) for a successful installation. This rack provides a rigid foundation for mounting trail essentials, from recovery gear to rooftop tents.

• Modular Gear Storage: Includes a multi-functional gear plate that can be mounted on the outside, inside, top, or underside of the rack to secure fuel cans, water tanks, or recovery boards.
• MOLLE Integrated: Each upright features a standard MOLLE system for attaching pouches and tools, along with integrated threaded fasteners for easy light mounting.
• Durable Construction: Finished in a high-quality textured black powder coat for superior corrosion resistance on the trail.
• Expandable Design: Compatible with optional accessories like the fold-down Gear Table or rear Reel Handles (sold separately).
• Mounting Flexibility: Designed to work with factory bed track systems or via bed rail clamp-on mounting brackets.

Warranty Information: Includes a limited lifetime warranty on materials and construction with a 5-year warranty on the textured black finish.

Fits 2020-2025 Jeep Gladiator models including Sport, Rubicon, Mojave, and Overland trims.

The Go Rhino XRS Overland Xtreme Rack is a comprehensive bed management system designed specifically for the Jeep Gladiator. This modular rack provides a versatile platform for mounting recovery gear, rooftop tents, and trail accessories without sacrificing bed utility. Built with Go Rhino's exclusive 4-Core crossbar system, the rack features integrated tracks that accept any standard 1/4" x 20 hardware, allowing for near-infinite customization of your cargo layout.

• Exclusive 4-Core crossbar system for universal accessory mounting
• Heavy-duty construction with a durable textured black powder coat finish
• Modular design optimizes bed space for overlanding and trail gear
• Box 1 of a 2-box system (Requires Part Number 5950000T-02 for complete installation)
• Manufacturer Part Number: 5950000T-01
• Limited Lifetime warranty on materials and construction; 5-year warranty on finish

Fits 2020-2025 Jeep Gladiator models across all trims including Sport, Rubicon, Mojave, and Overland.

The Go Rhino XRS Overland Xtreme Rack is engineered for serious overlanders who require a versatile, high-capacity cargo management system. Utilizing an innovative hybrid construction, this rack combines aluminum support bars and rails with rugged steel vertical uprights to balance maximum structural integrity with weight savings. The system is rated for a 300 lb static load and a 600 lb dynamic load, making it fully capable of supporting heavy rooftop tents and trail gear.

Central to the XRS system is Go Rhino's exclusive 4-CORE technology. This extruded track system features slotted bars that accept standard 1/4"-20 hex bolts, allowing you to secure almost any accessory without custom brackets. Each upright features a standard MOLLE system and integrated threaded fasteners for mounting lights or tools. Installation is entirely drill-free, utilizing either the included bed rail clamps or your Jeep's factory bed track mounting system.

• Load Ratings: 300 lbs Static / 600 lbs Dynamic
• 4-CORE Technology: Slotted aluminum bars compatible with 1/4"-20 hardware
• Construction: Aluminum crossbars and rails with steel vertical uprights
• Finish: Textured black powder coat
• Included Hardware: One multi-functional Accessory Gear Plate and bed rail mounting clamps
• Manufacturer Part Number: 5950000T
• Warranty: Limited Lifetime on materials/construction; 5-year on finish

Fits select 2006-2026 Chevrolet, Ford, GMC, Nissan, RAM, and Toyota trucks equipped with T-slot tonneau covers (excluding roll-up models).

The Go Rhino XRS Cross Bars kit provides a versatile mounting solution for rooftop tents, cargo boxes, and trail gear while maintaining full access to your truck bed. These 6-inch tall steel corner uprights elevate the 4-CORE cross bars just enough to clear the bed cap, keeping your gear below the cab roofline to minimize wind resistance and noise. The aluminum 4-CORE cross bars feature a specialized track system compatible with standard 1/4-20 hex head bolts, allowing for nearly unlimited accessory mounting configurations.

• Includes two aluminum 4-CORE cross rails and four 6-inch tall steel uprights.
• Heavy-duty construction supports up to 600 lbs static or 300 lbs dynamic load (evenly distributed).
• Mounts directly to tonneau covers equipped with T-slots/T-tracks.
• Textured black powder coat finish for superior corrosion resistance.
• Compatible with Go Rhino SRM series roof racks and 4-CORE accessories.
• No-drill installation on most applications; cutting required for some mid-size truck bed rails.
• Manufacturer Part Number: 5935015T

Compatible with Go Rhino XRS Bed Cross Rail Kits 5935000T and 5935001T.

Expand the utility of your XRS Bed Cross Rail system with the Go Rhino 37 3/4-inch Side Rail Accessory Set. These extruded aluminum rails bridge the uprights on both sides of the truck bed, adding functional mounting tracks for overland gear, recovery tools, and trail accessories. Each rail features the 4-CORE track system, which is designed to accept standard 1/4-inch x 20 hex bolts or quick-release clamps for a versatile, secure mounting surface.

Construction consists of lightweight, high-strength aluminum finished in a rugged textured black powder coat to resist corrosion and wear. The rails are sold in pairs and can be cut down to custom lengths to suit specific bed configurations or spacing requirements.

• Includes one pair of 37 3/4-inch side rails
• 4-CORE extruded aluminum track system for universal accessory mounting
• Compatible with 1/4-inch x 20 hex bolts or quick-release clamps
• Bolt-on installation with all necessary mounting hardware included
• Finished in textured black powder coat
• Manufacturer Part Number: 5935010T
• Warranty: Limited Lifetime on materials and construction; 5-year finish warranty

Fits select 2007-2026 Chevrolet Silverado, Ford F-150 and Super Duty, GMC Sierra, RAM 1500/2500/3500, and Toyota Tundra trucks.

The Go Rhino XRS Cross Bars Kit provides a heavy-duty foundation for rooftop tents and overland gear while maintaining full access to your truck bed. The system features 6-inch tall steel corner uprights that elevate the 4-CORE aluminum cross bars above the bed caps, allowing you to slide large items underneath and reducing wind resistance by keeping cargo below the cab roofline. Each 4-CORE cross bar is designed with integrated tracks that accept standard 1/4-20 hex head bolts, offering near-infinite mounting configurations for recovery gear, lighting, and trail tools.

Engineered for versatility and strength, this kit features a no-drill clamp-on installation for most applications or bolts directly to factory bed rail systems. The textured black powder coat finish is designed to withstand harsh environments, backed by a dedicated 5-year finish warranty.

• Load Rating: 600 lbs. static / 300 lbs. dynamic (evenly distributed)
• Construction: Steel corner uprights with two 4-CORE extruded aluminum cross rails
• Height: 6-inch clearance for unobstructed bed utility
• Mounting: 4-CORE system compatible with 1/4-20 hex head hardware and Go Rhino accessories
• Installation: Clamp-on or bolt-on to OEM track systems; no drilling or cutting required
• Compatibility: Works with Go Rhino SRM400, SRM500, and SRM600 roof racks; not compatible with bed covers
• Finish: Textured Black powder coat
• Part Number: 5935001T
• Warranty: Limited Lifetime structural / 5-year finish