The AEM V2 5 Gallon Water/Methanol Injection Tank Kit (30-3320) provides an increased fluid reservoir for high-demand WMI systems, significantly extending the range between refills. This universal tank is designed to integrate into any water/methanol setup, featuring robust construction compatible with high-concentration methanol mixes.

Equipped with an integrated conductive fluid level sensor featuring a flying lead, this tank allows your injection controller to monitor fluid levels and protect the engine from low-fluid conditions. The tank arrives ready for plumbing with a preinstalled 90° 1/4" push-lock fitting and includes all necessary hardware for a secure installation.

• High Capacity: 5-gallon reservoir reduces the frequency of fluid replenishment.
• Integrated Safety: Conductive fluid level sensor monitors levels to prevent pump cavitation or dry injection.
• Streamlined Plumbing: Preinstalled 90° 1/4" push-lock fitting for quick and secure hose connection.
• Complete Installation: Includes all required mounting hardware for a clean setup.
• Universal Application: Compatible with AEM V2 systems and most third-party water/methanol injection kits.

The AEM V3 Standard Controller Kit (MPN 30-3304) provides precise, boost-dependent control for your injection system. This redesigned controller features an internal MAP sensor that supports up to 35 psi of boost, eliminating the need for an external sensor for most forced induction applications. The housing is engineered for durability with integrated mounting tabs and a splash-resistant design covering the status LED and test buttons.

For accurate tuning, the V3 interface includes large, turn-resistant knobs and clear numbering to set start and full activation points. Installation is streamlined via a color-coded wiring harness with a positive-lock connector and an easily accessible integrated fuse. The controller housing includes a molded-in, barbed nipple for secure boost line connection and a wiring legend on the back for quick reference during setup.

• Internal MAP Sensor: Integrated barb fitting supports boost pressures up to 35 psi.
• Adjustable Interface: Large, turn-resistant knobs for setting accurate start and full activation points.
• Rugged Housing: Features splash-resistant status LED, test button, and molded mounting tabs.
• Plug-and-Play Integration: Mates to a redesigned color-coded harness with a positive-lock connector.
• Built-in Safety: Integrated, easy-access fuse protects the system during operation.
• MPN: 30-3304

Designed for high-horsepower applications that require precise tuning and engine safety, the Snow Performance SNO-94600H Direct Port Water-Methanol Upgrade provides individual cylinder injection for 6-cylinder engines. This hardline kit replaces single-nozzle plenum setups to ensure perfectly balanced fluid distribution across all six intake runners, preventing lean conditions in specific cylinders during high-boost operation.

This upgrade utilizes durable hardline plumbing for a permanent, professional-grade installation capable of handling high-pressure demands. The system includes a high-flow solenoid to prevent siphoning and ensure instantaneous fluid control. Note that this kit is designed for custom tuning; nozzles are not included and must be selected based on your specific horsepower requirements and engine displacement.

• Engineered for 6-cylinder engines requiring equalized port-to-port distribution
• Hardline plumbing provides superior durability and a clean aesthetic
• Includes 6-port distribution block and high-flow solenoid upgrade
• Allows for more aggressive ignition timing and higher boost levels
• Manufacturer Part Number: SNO-94600H
• Note: Injection nozzles are not included and must be purchased separately

Designed for high-horsepower applications that rely on water-methanol injection for cooling and tuning, the Snow Performance SNO-94500 direct port upgrade ensures even fluid distribution across all four cylinders. By mounting a nozzle directly into each intake runner, you eliminate the risk of unequal cooling or lean conditions common with single-nozzle setups in high-boost environments.

• Replaces or upgrades existing single-nozzle configurations to a 4-cylinder direct port layout.
• Includes a dedicated 4-cylinder distribution block for precise flow routing.
• Features a high-flow solenoid upgrade to prevent gravity siphoning and ensure crisp injection response.
• Plumbed with high-temperature nylon tubing and quick-connect fittings for a secure, leak-free installation.
• Manufacturer Part Number: SNO-94500

NOTE: Water-methanol nozzles are not included with this kit and must be purchased separately to match your engine's specific flow requirements.

Engineered for high-performance 4-cylinder engines utilizing a direct port water-methanol injection system, the Snow Performance SNO-93104 distribution block ensures precise and equal fluid delivery. This manifold is the central hub for your plumbing, allowing you to split the main feed into four dedicated lines for consistent cylinder-to-cylinder cooling and octane enhancement.

Built to withstand harsh chemicals, this distribution block is 100% methanol resistant. The hard-anodized black finish provides superior corrosion protection and a professional look under the hood. With four standard 1/8" NPT ports, it integrates easily with most water-meth nozzles and hardware.

• 100% Methanol resistant construction
• Hard-anodized black finish for maximum durability
• Features (4) 1/8" NPT ports for direct port setups
• Provides even fluid distribution across all 4 cylinders
• Manufacturer Part Number: SNO-93104

Protect your water-methanol injection system with the Snow Performance 50 Mesh Filter (SNO-82204-QC). This inline filter is designed to capture debris and contaminants before they can reach the pump or clog the precision orifices of your spray nozzles, ensuring consistent atomization and system longevity.

• 50-mesh stainless steel filter element provides reliable filtration without restricting fluid flow
• Integrated Quick Connect fittings allow for a fast, leak-free installation into the fluid line
• Serviceable housing design allows for easy disassembly and cleaning of the mesh screen
• Prevents nozzle clogging and protects high-pressure pump internals from abrasive debris
• Manufacturer Part Number: SNO-82204-QC

The Snow Performance SNO-82204 50 Mesh Water-Methanol Filter is an essential safeguard for your injection system, designed to capture contaminants before they reach sensitive components. By filtering out debris, this unit helps prevent premature pump wear and catastrophic nozzle clogs that can lead to inconsistent spray patterns or engine lean-out.

• Filter Grade: 50 mesh element
• Installation: Vacuum-side placement only (before the pump)
• Compatibility: Suitable for use with water and methanol mixtures
• Manufacturer Part Number: SNO-82204

Protect your water-methanol injection system from contaminants with the Snow Performance Billet 100 Micron Water Filter (SNO-38FIL). Debris and sediment in the fluid reservoir can lead to inconsistent spray patterns, clogged nozzles, or premature pump failure. This inline filter provides a necessary layer of defense, ensuring only clean fluid reaches your high-pressure components.

Precision-machined from billet aluminum for long-term durability and corrosion resistance, this filter is engineered specifically for use in systems equipped with braided stainless steel lines. Its high-flow design maintains system pressure while capturing particles as small as 100 microns, making it an essential upgrade for any methanol-injected vehicle requiring maximum reliability.

• Manufacturer Part Number: SNO-38FIL
• Filtration Rating: 100 Micron
• Material: Billet Aluminum construction
• Connection Type: Designed for braided stainless steel lines (SNO-803-BRD)
• Application: Inline protection for water-methanol injection pumps and nozzles

This is a direct replacement reservoir cap for AEM 1.15-gallon and 5-gallon water/methanol injection systems. Engineered to maintain a secure seal while allowing for the natural expansion and contraction of fluid, this vented cap ensures your injection system remains pressurized and leak-free during operation.

The AEM 30-4508 features a wide-diameter design to facilitate quick, mess-free refills. To ensure easy removal and installation even when the engine bay is hot or hands are oily, the perimeter is designed with heavy-duty ridges for maximum grip.

• Direct replacement for AEM 1.15-gallon and 5-gallon reservoirs
• Vented to manage fluid expansion and contraction while maintaining a tight seal
• Aggressive ridged design for easy installation and removal
• Wide-mouth profile for simplified fluid refills
• Manufacturer Part Number: 30-4508

The AEM V2 1.15 Gallon Water/Methanol Injection Tank (MPN 30-3325) provides a secure, high-capacity reservoir for your water-meth injection system. Designed for durability and ease of use, this reservoir features a compact footprint to allow for flexible mounting options in the engine bay or trunk.

This tank is equipped with a built-in conductive level sensor, designed to integrate with AEM V2 controllers to provide low-fluid warnings. It includes a large-diameter cap to facilitate spill-free refilling and is supplied with all necessary mounting hardware for a straightforward installation.

• 1.15 Gallon (4.35 Liter) capacity
• Integrated conductive fluid level sensor for low-level warnings
• Large reservoir cap for easy refilling
• Compact design for versatile installation options
• Includes mounting hardware and installation brackets
• Manufacturer Part Number: 30-3325

The AEM V3 Water/Methanol Extra Nozzle Kit (30-3315) features an advanced injector design engineered to maximize cooling efficiency through superior atomization. Utilizing AEM’s proprietary Swirl Generator Technology, this kit breaks down fluid into a finer mist than standard nozzles, resulting in faster inlet air temperature (IAT) reductions and more efficient fluid consumption.

This kit is designed for versatility, featuring an interchangeable pintle system that allows you to tailor your injection volume to your engine's specific requirements. Whether you are tuning a high-boost forced induction setup or a moderate street build, the included swirl generators provide the precision needed for consistent performance.

• Exclusive Swirl Generator Technology for enhanced fluid atomization and rapid cooling
• Interchangeable pintle design allows for adjustable flow rates between 250cc and 1000cc
• Optimizes fluid use to maintain consistent inlet air temperatures
• Includes three (3) Swirl Generators: 250cc, 500cc, and 1000cc
• Manufacturer Part Number: 30-3315

The AEM 30-3314 Water/Methanol Injection Nylon Hose provides the high-pressure durability and chemical resistance required for methanol-delivery systems. This 20-foot length of tubing is ideal for extending existing fluid lines or plumbing custom installations where extra reach is necessary. Constructed from high-quality black nylon, it is engineered to handle the specific demands of automotive water/methanol injection without degradation.

• Manufacturer Part Number: 30-3314
• Length: 20 Feet
• Diameter: 1/4 Inch
• Material: Chemical-resistant Black Nylon
• Function: Fluid delivery line for water/methanol injection systems

Upgrade or maintain your water/methanol injection system with the AEM V3 Water/Methanol Injection Dual Nozzle Kit (30-3313). This kit is designed for enthusiasts needing a dual-nozzle configuration to increase flow capacity or improve distribution across the intake tract. The V3 nozzle design features advanced internal geometry to produce a finer mist, ensuring better atomization and more effective cooling of the intake charge.

• Includes two (2) V3 Water/Methanol injectors and a T-adapter for dual-nozzle plumbing.
• Comes with interchangeable swirl generators for each injector, offering flow rates of 250cc/min, 500cc/min, and 1000cc/min.
• Supports a combined maximum flow rate of up to 2000cc/min when utilizing both 1000cc generators.
• Improved atomizing design helps reduce droplet size for more consistent combustion and knock suppression.
• Direct replacement or expansion for AEM Water/Methanol Injection systems.

Upgrade or replace your water/methanol injection management with the AEM V2 HD Controller Kit (30-3306). Engineered for high-boost applications, this heavy-duty controller features an integrated internal MAP sensor capable of monitoring up to 40 PSI. This allows for precise fluid delivery based on real-time boost pressure, ensuring your engine receives cooling and octane-enhancing benefits exactly when needed.

Designed for simplified installation and long-term reliability, the V2 HD controller utilizes a color-coded wiring harness and an on-board status LED for immediate system diagnostics. The unit connects directly to your boost source via a built-in barb fitting, eliminating the need for external pressure sensors in many configurations.

• Manufacturer Part Number: 30-3306
• Integrated internal MAP sensor supports up to 40 PSI
• Heavy-duty (HD) housing for improved durability in performance environments
• Standard barb fitting for secure boost line connection
• Color-coded wiring harness ensures an organized and accurate installation
• System status LED for real-time monitoring and troubleshooting
• Note: Includes controller and harness only

The AEM V2 Multi-Input Water/Methanol Injection Controller (30-3305) provides precision control for both naturally aspirated and forced induction applications. This versatile unit allows for multiple trigger options, including 0-5V analog signals, MAF frequency or voltage, injector duty cycle, or an external MAP sensor, making it adaptable to nearly any EFI-equipped vehicle.

Designed for straightforward integration, the kit includes a color-coded wiring harness and an integrated LED status light for real-time system monitoring. This is a "controller only" kit, ideal for replacing a worn unit or upgrading an existing water/methanol system to the advanced AEM V2 platform for improved reliability and triggering accuracy.

• Versatile Triggering: Supports 0-5V, MAF frequency/voltage, duty cycle, and external MAP signals.
• Installation-Ready: Features a dedicated, color-coded wiring harness for easy mapping.
• Universal Application: Engineered for use on both N/A and boosted engine configurations.
• System Diagnostics: On-board LED provides clear status and troubleshooting feedback.
• Manufacturer Part Number: 30-3305

The AEM 30-3018 Water/Methanol Injection Recirculation Pump is a high-pressure fluid delivery solution designed for forced induction and high-performance applications. Engineered to maintain a consistent 200 PSI, this pump ensures proper atomization of the water-methanol mixture into your intake stream to effectively reduce air intake temperatures and suppress detonation.

This unit is equipped with 3/8-inch NPT inlet and outlet ports, providing a robust connection point for custom plumbing. Unlike standard push-to-connect fittings, these threaded ports allow for the secure installation of braided stainless steel or hard lines, making it an ideal choice for high-pressure race applications. The pump features a directional flow design and is capable of a 1.0 gallon per minute (GPM) flow rate.

• Maximum Pressure: 200 PSI
• Flow Rate: 1.0 Gallon Per Minute (GPM)
• Port Size: Dual 3/8-inch NPT female ports
• Design: Recirculation style with directional flow
• Manufacturer Part Number: 30-3018

Maintain the performance of your AEM water/methanol injection system with this high-flow 200 PSI recirculation-style replacement pump. Designed specifically for the demands of WMI systems, this pump ensures consistent fluid delivery and proper atomization for effective charge cooling and octane enhancement.

The pump features a fully sealed and weatherproofed housing, making it durable enough for mounting in exposed locations. Its compact footprint includes an integrated mounting bracket and push-lock hose connections to facilitate a clean, leak-free installation. As a recirculation-style pump, it utilizes an internal bypass to maintain steady pressure without the constant cycling found in standard demand pumps.

• Maximum Operating Pressure: 200 PSI
• Current Draw: 6 Amps
• Internal recirculation bypass for smooth pressure delivery
• Integrated 1/4-inch push-lock hose connections
• Heavy-duty integrated mounting bracket
• Weatherproofed and sealed pump unit
• Manufacturer Part Number: 30-3015

The AEM 30-3003 Water/Methanol Inline Injection Filter is a critical protection component designed to safeguard your injection pump and nozzles from debris and foreign particles. By filtering contaminants as small as 40 microns, this inline filter prevents clogs and internal damage that can compromise system performance and engine safety.

• System Protection: Effectively filters particles up to 40 microns to ensure clean fluid delivery.
• Easy Installation: Equipped with 1/4-inch push-lock fittings for quick and secure plumbing into your existing lines.
• Strategic Placement: Designed for installation on the low-pressure side of the system, specifically between the supply tank and the injection pump.
• Universal Application: Compatible with most water/methanol injection setups using 1/4-inch OD tubing.
• Manufacturer Part Number: 30-3003